Dishwashing Essentials, Hot Water, Detergent

DISHWASHING ESSENTIALS

Hot Water

For optimal cleaning and drying results, hot water is necessary. The incoming water temperature should be 120-140° F (49-60° C) to properly acti- vate the detergent and melt greasy food soils.

To check the incoming water temperature, turn on the hot water faucet nearest the dishwasher and let it run into a glass in the sink. Place a candy thermometer in the glass and check the temperature once it has stopped rising. If the temperature is below 120° F (49° C), have a qualified per- son raise the water heater thermostat set- ting.

Before starting the dishwasher, turn on the hot water faucet and let it run until the water is hot. This assures that the initial fill of water is hot.

Detergent

Use a detergent designed specifically for use in an automatic dishwasher. Be sure it is fresh and stored in a cool, dry place (not under the sink).

RECOMMENDED AMOUNT

Too little detergent results in poor cleaning, hard water filming/spotting and poor dry-

ing. Too much detergent can cause per- manent etching/cloudiness.

The amount of detergent to use is deter- mined by the hardness of the water and soil level of the load. Refer to the following chart for detergent usage recommenda- tions.

Do not use detergent with Rinse Only. Leave the detergent lid open when running Rinse Only.

In extremely hard water conditions (13 grains per gallon or more*), it is difficult to achieve good results with any dishwasher. A mechanical water softener may be nec- essary to improve water quality, detergent effectiveness, and protect the dishwasher parts from the damage that hard water can cause.

Water Hardness*	Soil Level	Detergent Amount**
		(per cup dosage)

Soft (0-4 gpg)	Light Soil	5 teaspoons
	Normal Soil	6 teaspoons
	Heavy Soil	8 teaspoons
Medium (5-9 gpg)	Light Soil	7 teaspoons
	Normal Soil	8 teaspoons
	Heavy Soil	10 teaspoons
Hard (10-12 gpg)	Light Soil	9 teaspoons
	Normal Soil	10 teaspoons
	Heavy Soil	12 teaspoons

*Your local water utility or state uni- versity extension service can tell you the degree of water hardness in your area.

**Add recommended amount of detergent to both compartments for AutoClean, Heavy or Normal wash cycles, and to the main cup only for the Light wash cycle.

Rinse Aid

Regular use of a rinse aid improves drying, reduces spotting and filming, and reduces moisture left on the dish- washer interior.

Your dishwasher features an automatic rinse aid dispenser located near the deter- gent cups in the door.

The clear window in the center of the dis- penser cap allows you to see if there is rinse aid in the reservoir. When the window is colored, there is rinse aid in the dis- penser. When the window becomes clear, it is time to refill the dispenser. Check the dispenser monthly.

To add rinse aid to the dispenser, turn the cap counterclockwise to open. Remove the cap and pour liquid rinse aid into the

opening. Replace the cap and turn it clock- wise.

Use the LESS setting for soft water and the MORE setting for hard water. Set the cap anywhere between these amounts as needed.

MDB/C-2 specifications

The Maytag MDB/C-2 is a reliable and powerful built-in dishwasher that resonates with consumers seeking efficiency and performance in their kitchen appliances. Designed to handle up to 14 place settings, it is ideal for families or individuals who frequently host gatherings. The energy-efficient design also helps users save on utility bills while maintaining a commitment to sustainability.

One of the standout features of the MDB/C-2 is its robust cleaning system, known as the PowerBlast® cycle. This innovative technology excels in removing stubborn food residues thanks to high-pressure spray jets, targeted wash arms, and a dedicated pre-soak functionality. Users can expect spotless dishes even after the most challenging meal preparations.

Efficiency is further enhanced by the unit's Steam Clean option, which utilizes steam to penetrate and loosen tough stains, leading to an exceptionally clean finish. The dishwasher also features a heated dry option that ensures thorough drying, eliminating the hassle of hand-drying dishes post-cycle.

The MDB/C-2 integrates advanced sound insulation technology, rendering it one of the quieter models on the market. Operating at a mere 44 dBA, it allows for unobtrusive cleaning, maintaining a peaceful kitchen environment, even during operation. This level of noise reduction is achieved through specially designed sound dampening materials and a solid door design.

Smart features such as the Delay Start option also add to the convenience of the Maytag MDB/C-2. This functionality allows users to set the dishwasher to run at a more convenient time, whether overnight or during a busy day, ensuring clean dishes are always ready when needed.

In terms of durability, the MDB/C-2 is built with Maytag’s renowned quality. The stainless steel tub offers resistance to stains and odors while contributing to improved drying performance. Additionally, the model is backed by a 10-year limited parts warranty, ensuring peace of mind for consumers.

Overall, the Maytag MDB/C-2 combines powerful cleaning capabilities, energy-efficient operation, and user-friendly features, making it a top choice for homeowners who value performance and reliability in their kitchen appliances. This dishwasher not only makes the chore of cleaning dishes effortless but does so while maintaining industry-leading standards for quality and performance.