Emerson Process Management ES30 Pre-setting Stations In The Tuner Memory, Example FM 103.5 MHz

Pre-setting Stations In The Tuner Memory

This system includes a 20 station preset memory. You can store up to 10 FM stations and 10 AM stations in the tuner memory for immediate recall. The procedure for storing stations in memory is as follows:

1.) Follow step 3 under “Listening To The Radio” in page 17 to select the first station you wish to memorize.

Example: FM 103.5 MHz.

2.) When the desired station appears on the display press the MEMORY button on the front panel or the remote control.

The Channel # “01” indicator appears and the “MEMORY” indicator flashes in the display.

3.) Press the MEMORY button on the front panel or the remote control once more to enter the station in preset memory channel “01”.

The MEMORY indicator stops flashing.

4.) Tune to the next station you wish to memorize. Example: FM 106.70 MHz.

Press the MEMORY button. The “MEMORY” indicator flashes again.

5.) Press the REPEAT/M-UPbutton on the front panel or remote control to select preset memory channel “02”.

Then press the MEMORY button to enter the desired station in preset memory channel 02.

6.) Repeat steps 4 and 5, selecting a different preset memory channel number each time, until you have entered up to 10 FM stations in the tuner memory.

7.) Press the STOP/BAND button to select the AM band and follow the same procedure to enter up to 10 AM stations in the tuner memory.

19

ES30_072905.p65 19

29/7/2005, 16:41