Emerson Process Management ES30 owner manual Template Instructions

Page 38

Template Instructions

1.) Select the desired location for wall mounting after carefully reviewing the "General Precautions and Recommendations" of the wall mounting instructions.

2.) Tape the template to the wall, or other surface, in the desired location. Align the top edge of the template with the pencil mark you made on the wall. Be sure to allow at least 3" clearance above the main unit, for the CD door to open fully.

3.) Make sure that the template is level.

4.) Use an awl, ice pick, a nail or similar pointed tool, and push through the template to make a small starter hole in the wall surface as indicated by the "Drill Hole Here" marks. Then remove the template from the wall.

5.) Before You Drill: Make sure that there are no water pipes, gas pipes, electrical wires on other obstructions or hazards behind the wall in your chosen mounting location. If you are not sure about this and don't know how to check, perhaps you should consider having the system mounted by someone with the necessary experience.

6.) Make sure that you are using the correct type of anchors for your wall.

•If the wall material is Sheetrock® (sometimes called wall-board, gypsum-board, or plaster-board) you can use plastic ‘hollow-wall anchors’.

•If your wall is solid plaster, concrete, brick, or similar solid material, use the appropriate type of ‘solid-wall anchors’.

•If your wall is solid wood, you may be able to use round-head wood screws without anchors.

Important: If you have no experience installing wall anchors you should have this system mounted by someone who does have the proper experience.

Whichever type anchors you use, make sure that the diameter of the screw heads is at least 1/4”.

Follow the instructions supplied with the wall anchors to determine the proper size drill bit to use in your electric drill. After installing the proper size bit, drill holes in the wall surface at the 4 locations where you made the starter holes in Step 4.

37

ES30_072905.p65

37

29/7/2005, 16:41

Page 37 Page 39
Image 38
Page 37 Page 39
Contents ES30 Important Safety Instructions Before We Begin Important Notes Class 1 Laser ProductUnpacking And Set Up Preparation for USEPositioning The Main Unit And Speakers Speaker Connections Connecting To External Audio Sources Protect Your Furniture Power Source Location of Controls and Indicators 13 14Remote Control Installing The Remote Control Batteries Battery PrecautionsOperating Instructions Turning The System ‘On’Volume Controls EQ Electronic Preset EqualizerMute Button On Remote Control Only Phones Stereo Headphone JackSetting The Clock Manual Tuning Listening To The RadioHints For Better Reception Pre-setting Stations In The Tuner Memory Example FM 103.5 MHzRecalling Preset Stations Changing Preset StationsPlaying Compact Discs Normal Playback Pause Control Skip Track and High Speed Music SearchOne Track Repeat Repeat PlaybackAll Tracks Repeat Intro Scan Playback Remote Control Only Random PlaybackProgrammed Playback Program Repeat Playback PLAY/PAUSE buttonTimer Function To Set The Turn ‘On’ TimeES30072905.p65 29/7/2005 Sleep Timer To Operate The Sleep TimerCD Playback Mode MODE/REMAIN ButtonAuxiliary Operation On Front Panel Only Resetting The System Computer Wall Mounting Instructions General Precautions and Recommendations ES30072905.p65 29/7/2005 Template Instructions Anchor Wall Surface GapES30072905.p65 29/7/2005 Care Of The Cabinet Care and MaintenanceCompact Disc Care Call Toll Free Limited Warranty Emerson

ES30 specifications

Emerson Process Management ES30 is a cutting-edge automation and control solution tailored for process industries. Designed to enhance productivity, reliability, and safety, it leverages advanced technologies that facilitate effective management of complex systems.

One of the standout features of the ES30 is its user-friendly interface, which enables operators to monitor and control processes seamlessly. The intuitive graphical displays allow for rapid assessment of system performance, helping to identify areas that require attention and streamlining decision-making processes. The system is highly configurable, offering users the flexibility to customize dashboards and reports to meet their specific operational needs.

The ES30 integrates advanced data analytics capabilities that provide real-time insights into process performance. This technology utilizes machine learning algorithms to analyze historical data trends and predict potential issues before they arise, leading to proactive maintenance and reduced downtime. With its advanced predictive analytics, users can optimize processes and improve overall efficiency, translating into cost savings and higher productivity.

Another notable characteristic of the ES30 is its robust communication protocols. The system supports a wide array of industrial communication standards, including Modbus, OPC, and Ethernet/IP. This versatility ensures seamless integration with existing infrastructure and facilitates interoperability between devices, eliminating data silos, and promoting a connected environment.

Security is also a paramount consideration in the ES30 design. The system incorporates multiple layers of cybersecurity measures to protect sensitive data from unauthorized access. Regular updates and patches ensure that the system remains resilient against emerging threats, providing peace of mind for operations.

In conclusion, the Emerson Process Management ES30 stands out in the field of industrial automation with its combination of user-friendly design, advanced analytics, flexible integration capabilities, and robust security features. By empowering organizations to enhance process control and optimization, the ES30 plays a crucial role in driving operational excellence and competitive advantage in the ever-evolving landscape of process management.
Top Page Image Contents