Installation and Operartion, cont’d

Under furniture mounting

If desired, mount the SW6 VGA Audio under a desk or other furniture (figure 2-2) with the optional MBU 129 under-desk mounting bracket (part #70-219-01), as follows:

Remove and discard

(4) screws from top. Replace with supplied screws.

Under Desk

Mounting Bracket

	(4) Screws
Figure 2-2 — Mounting the unit under a desk
1.	If installed, remove the feet from the bottom of the unit.
2.	Remove and discard the four screws in the top of the
	switcher.
3.	Using the screws supplied in the mounting bracket kit,
	secure the mounting brackets to the top of the switcher
	with the slotted holes on the outside.
4.	Hold the switcher with the attached brackets against the
	underside of the table or other furniture. Mark the location
	of the brackets’ slotted screw holes on the mounting
	surface.
5.	Drill 3/32" (2 mm) diameter pilot holes, 1/4" (6.3 mm)
	deep in the mounting surface at the marked screw
	locations.

6.	Insert #8 wood screws into the four pilot holes. Tighten
	each screw into the mounting surface until just less than
	1/4” of the screw protrudes.
7.	Align the mounting screws with the slots in the brackets
	and place the switcher against the surface, with the screws
	through the bracket slots.
8.	Slide the switcher slightly forward or back, then tighten all
	four screws to secure the switcher in place.

Connections

100-240V 0.3A

50/60 Hz

	1		3
		2
	Figure 2-3 — SW6 VGA A rear panel (left half)
A	AC power connector — Plug a standard IEC power cord
	into this connector to connect the switcher to a 100 VAC to
	240 VAC, 50 or 60 Hz power source.
B	Video Input connectors — Connect up to six RGBHV computer
	video (VGA–QXGA) to these 15-pin HD connectors.
	N The switcher can also accept RGBS, RGsB, RsGsBs, and
		HDTV component video.
C	Video Output connector — Connect an RGBHV (VGA-QXGA)
	video display to this female 15-pin HD connector.

2-4

SW6 VGA Audio • Installation and Operation

2-5

SW6 specifications

Extron Electronics is renowned for its innovative solutions in the audiovisual (AV) industry. Among its extensive range of products, the SW6 and SW8 series stand out as versatile audio/video switchers designed to streamline the process of managing multiple AV sources.

The Extron SW6 and SW8 are classified as standalone switchers that cater to various application needs, making them particularly suitable for classrooms, conference rooms, and control rooms. The SW6 model allows for the switching of up to six AV sources, while the SW8 model expands this capability to eight sources. This flexibility is crucial in environments where multiple devices need to be connected seamlessly, enhancing productivity and collaboration.

One of the main features of the SW6 and SW8 switchers is their input versatility. They can accommodate a wide array of video formats, including HDMI, VGA, and composite video, ensuring compatibility with older and newer devices alike. Furthermore, both models support audio formats, allowing for the integration of both video and sound sources in a single unit. The switchers typically include audio embedding, which seamlessly combines audio from a chosen source with the video output, enabling streamlined audio and video transmission.

In terms of technology, the Extron SW6 and SW8 devices incorporate advanced switching technology that ensures reliable signal management with minimal latency. Setting them apart is their ability to support features like automatic input switching, allowing users to enjoy an uninterrupted viewing experience without the need for manual intervention. The included RS-232 and Ethernet control capabilities also provide flexibility for integration into larger control systems, enhancing their functionality within complex AV setups.

Additionally, both the SW6 and SW8 series are designed with user-friendly interfaces. Front-panel push buttons allow for intuitive operation, while remote control options give flexibility for integration into existing systems. The units also feature status indicators, providing users with real-time feedback on the currently selected input, making operation straightforward even for non-technical users.

In conclusion, the Extron SW6 and SW8 audio/video switchers are essential tools for managing multiple AV sources with ease. Their versatility in handling various input formats, advanced switching technology, and user-friendly design make them ideal for a range of applications. Whether in an educational setting or a corporate environment, these switchers deliver superior performance and reliability, affirming Extron’s commitment to excellence in the audiovisual landscape.