Maytag W10306244A, MMV4203WS Cookware and Dinnerware, Microwave Oven Use, Microwave Oven Care

Page 4

Cookware and Dinnerware

Microwave-Safe

Do Not Use

Browning dish (Follow manufacturer recommendations.)

Metal cookware and bakeware

Ceramic glass, glass

Straw or wicker

China, earthenware (Follow manufacturer recommendations.)

Gold, silver or pewter

Melamine (Follow manufacturer recommendations.)

Non-approved meat thermometers, skewers

Paper towels, paper plates, napkins (Use non-recycled paper.)

Twist ties

Plastic wraps, bags, covers, dinnerware, containers (Follow

Foil liners, such as sandwich wrappers

 

manufacturer recommendations.)

Staples

Pottery and clay (Follow manufacturer recommendations.)

Objects with gold or silver trim or with metallic glaze

Silicone bakeware (Follow manufacturer recommendations.)

 

 

Wax paper

 

 

To Test Cookware/Dinnerware: Place dish in microwave oven with 1 cup (250 mL) of water beside it. Program 1 minute of cook time at 100%. If dish becomes hot and the water stays cool, do not use the dish in the microwave oven.

Microwave Oven Use

For list of preset programs, see the Quick Reference Guide provided with your model.

Manual Cooking/Stage Cooking

Touch COOK TIME, touch number pads to enter time, touch COOK POWER (if not 100%), touch number pads to enter power level (10-90), then touch the Start control.

If programming additional stages, enter the cook time and cook power of each before touching the Start control.

Add More Time

At the end of any cycle, “ADD MORE TIME 0:00” appears in the display. Enter the additional time, if desired, and start the microwave oven.

Warm Hold (on some models)

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before or after cooking.

Doing so can result in food poisoning or sickness.

Hot cooked food can be kept warm in the microwave oven. The Warm Hold function uses 10% cook power. Warm Hold can be used by itself or can be programmed to follow a cooking cycle. Opening the door during Warm Hold will cancel the function.

Microwave Oven Care

General Cleaning

IMPORTANT: Before cleaning, make sure all controls are off and the microwave oven is cool. Always follow label instructions on cleaning products.

To avoid damage to the microwave oven caused by arcing due to soil buildup, keep cavity, microwave inlet cover, cooking rack supports, and area where the door touches the frame clean.

Clean with mild soap, water and a soft cloth or sponge, or as indicated below.

Grease filters: mild soap and water or dishwasher.

Door and exterior: mild soap and water, or glass cleaner applied to paper towel.

Control panel: sponge or soft cloth and water.

Stainless steel (on some models): mild soap and water, then rinse with clean water and dry with soft cloth, or use stainless steel cleaner.

Turntable: mild soap and water or dishwasher.

Cooking rack and supports: mild soap, water and washcloth. Dishwasher cleaning is not recommended.

Installing/Replacing Filters and Light Bulbs

NOTE: A filter status indicator (on some models) appears in the display when it is time to replace the charcoal filter, and clean or replace the grease filter. See “Settings” section to reset filter status.

Grease filters: Grease filters are on the underside of microwave oven. Clean monthly, or as prompted by filter status indicator. Slide the filter away from the tab area, and drop out the filter.

To reinstall, place end of the filter into the opening opposite the tab area, swing up the other end, and slide it toward the tab area.

Charcoal filter: The charcoal filter is behind the vent grille at the top front of the microwave oven. The charcoal filter cannot be cleaned, and should be replaced about every 6 months, or as prompted by filter status indicator. Remove two screws on the vent grille, tilt the grille forward, lift it out, and remove filter. To reinstall, place the filter into its slotted area – wire mesh side up, replace vent grille, and secure with screws.

Cooktop light: The cooktop light bulb is located on the underside of the microwave oven, and is replaceable. Remove bulb cover screw, and open the bulb cover. Replace bulb, close bulb cover, and secure with screw.

Cavity light: The cavity light bulb is located behind the vent grille at the top front of the microwave oven, under the bulb cover, and is replaceable. Remove two screws on the vent grille, tilt the grille forward, and lift it out. Open bulb cover and replace bulb. Close bulb cover, replace vent grille, and secure with screws.

4

Image 4
Contents Microwave Hood Combination Safety Important Safety InstructionsW10306244A Important Safety Instructions Settings FeaturesGrounding Instructions Electrical RequirementsMicrowave Oven Use Cookware and DinnerwareMicrowave Oven Care Troubleshooting Replacement Parts and Cleaning SuppliesW10306244A This limited warranty does not coverSP PN W10306246A

W10306246A, W10306244A, MMV4203WS specifications

The Maytag W10306244A, MMV4203WS, and W10306246A represent a trio of kitchen appliances designed to elevate the cooking experience while prioritizing efficiency and user convenience. These products are particularly noteworthy for their advanced features, modern technology, and robust performance.

The Maytag W10306244A is a microwave trim kit that enhances both the aesthetic appeal and functionality of your kitchen. Designed specifically to fit a range of microwaves, it embodies a sleek style that seamlessly integrates into cabinetry. The kit allows for easy installation, providing a built-in look that complements various kitchen designs. Its durable construction ensures longevity, while the stainless steel finish resists stains and fingerprints. This makes it an ideal addition for those looking for both form and function in their kitchen.

Moving on to the Maytag MMV4203WS microwave, this appliance stands out with its powerful performance and spacious interior. Featuring a 1.2 cu. ft. capacity, it can easily accommodate a variety of dishes, making it perfect for families and meal preparation. The microwave boasts a 400 CFM ventilation system, effectively removing smoke, steam, and odors from the kitchen. Additionally, it includes multiple cooking options, such as sensor cooking, which automatically adjusts cooking times and power levels for perfect results. The easy-to-navigate control panel adds to user convenience, allowing for seamless operation.

Lastly, the Maytag W10306246A is another trim kit designed for customized microwave installations. Like the W10306244A, it is constructed with high-quality materials that ensure durability and a polished look. This kit allows users to create a streamlined kitchen appearance by minimizing gaps and providing a professional finish. It is compatible with various Maytag microwave models, making it a versatile choice for those looking to update their kitchen decor.

Together, the Maytag W10306244A, MMV4203WS, and W10306246A showcase the brand's commitment to quality, reliability, and innovative design. These products not only enhance the functionality of the kitchen but also offer stylish solutions that cater to the modern homeowner’s needs. Whether you're looking for a straightforward microwave solution or a decorative trim kit, these Maytag appliances provide an ideal blend of performance and elegance.