Maytag MMV4203WS, W10306244A Grounding Instructions, Electrical Requirements, Settings, Features

Page 3

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Observe all governing codes and ordinances.

Required:

A 120 Volt, 60 Hz, AC only, 15- or 20-amp electrical supply with a fuse or circuit breaker.

Recommended:

A time-delay fuse or time-delay circuit breaker.

A separate circuit serving only this microwave oven.

GROUNDING INSTRUCTIONS

For all cord connected appliances:

The microwave oven must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. The microwave oven is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

WARNING: Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or serviceman if the grounding instructions are not completely understood, or if doubt exists as to whether the microwave oven is properly grounded.

Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the microwave oven.

SAVE THESE INSTRUCTIONS

This device complies with Part 18 of the FCC Rules.

Settings

Clock

The Clock is a 12-hour (12:00-11:59) clock, with A.M. and P.M. Touch CLOCK, enter time, then touch CLOCK or the Start control.

Timer (on some models)

Timer can be used independently during any cooking program. Touch the Timer control, enter time, then touch the Timer control or the Start control.

Control Lock

Activate to avoid unintended start. Touch and hold the Cancel control for about 3 seconds until 2 tones sound and padlock icon appears in the display. Repeat to unlock control.

Options or Setup

Vent Timer, Light Timer, Filter Reset, Sound On/Off, Scroll Speed, Demo Mode and Language (on some models - English or French) may be changed.

Vent Fan

Various speeds, ranging from high to low, and off. Comes on automatically as cooling fan during any cook function.

Vent Timer (on some models): Set vent fan to run for exactly 30 minutes, or to run for only 30 minutes more (off after

30 minutes). The vent fan may be turned off at any time using the Vent Fan control. Touch the Options or Setup control to reach the “Vent Fan” submenu, and select the setting.

Light Timer

Set the cooktop light to turn on and off at certain times. Touch Options or Setup control to reach the “Light Timer” submenu, and set the Light On Time and Light Off Time in hours and minutes with A.M. or P.M.

Filter Reset

Reset the filter status after replacing and/or cleaning the filters. Touch Options or Setup control to reach the “Filter Reset” submenu and activate reset. See “Microwave Oven Care” section.

Tones

Programming tones and signals. Programming tones may be turned off, or all tones (including end-of-function signals) may be turned off. Touch the Options or Setup control to reach the “Sound On/Off” submenu, and turn tones off or on.

Scroll Speed

Scroll speed of the text may be adjusted. Touch the Options or Setup control to reach the “Scroll Speed” submenu, and select the scroll speed. Touch the Start control to set speed.

Demo Mode

Activate to practice using the control without actually turning on the magnetron. Touch the Options or Setup control to reach the “Demo Mode” submenu, and activate or deactivate Demo Mode.

Features

Cooking Rack

Use only for 2-level cooking. To avoid damage to the microwave oven, always remove rack after 2-level cooking. To avoid damage to the microwave oven due to soil buildup, clean rack supports often.

Turntable

Turntable may be turned off (on some models) for manual cooking only. This is helpful when cooking with plates that are bigger than the turntable, or when cooking with plates that are side by side.

Turntable cannot be turned off during preset or sensor (on some models) functions.

3

Image 3
Contents Important Safety Instructions Microwave Hood Combination SafetyW10306244A Important Safety Instructions Electrical Requirements SettingsFeatures Grounding InstructionsCookware and Dinnerware Microwave Oven UseMicrowave Oven Care Replacement Parts and Cleaning Supplies TroubleshootingThis limited warranty does not cover W10306244ASP PN W10306246A

W10306246A, W10306244A, MMV4203WS specifications

The Maytag W10306244A, MMV4203WS, and W10306246A represent a trio of kitchen appliances designed to elevate the cooking experience while prioritizing efficiency and user convenience. These products are particularly noteworthy for their advanced features, modern technology, and robust performance.

The Maytag W10306244A is a microwave trim kit that enhances both the aesthetic appeal and functionality of your kitchen. Designed specifically to fit a range of microwaves, it embodies a sleek style that seamlessly integrates into cabinetry. The kit allows for easy installation, providing a built-in look that complements various kitchen designs. Its durable construction ensures longevity, while the stainless steel finish resists stains and fingerprints. This makes it an ideal addition for those looking for both form and function in their kitchen.

Moving on to the Maytag MMV4203WS microwave, this appliance stands out with its powerful performance and spacious interior. Featuring a 1.2 cu. ft. capacity, it can easily accommodate a variety of dishes, making it perfect for families and meal preparation. The microwave boasts a 400 CFM ventilation system, effectively removing smoke, steam, and odors from the kitchen. Additionally, it includes multiple cooking options, such as sensor cooking, which automatically adjusts cooking times and power levels for perfect results. The easy-to-navigate control panel adds to user convenience, allowing for seamless operation.

Lastly, the Maytag W10306246A is another trim kit designed for customized microwave installations. Like the W10306244A, it is constructed with high-quality materials that ensure durability and a polished look. This kit allows users to create a streamlined kitchen appearance by minimizing gaps and providing a professional finish. It is compatible with various Maytag microwave models, making it a versatile choice for those looking to update their kitchen decor.

Together, the Maytag W10306244A, MMV4203WS, and W10306246A showcase the brand's commitment to quality, reliability, and innovative design. These products not only enhance the functionality of the kitchen but also offer stylish solutions that cater to the modern homeowner’s needs. Whether you're looking for a straightforward microwave solution or a decorative trim kit, these Maytag appliances provide an ideal blend of performance and elegance.