Maytag W10336688A Grounding Instructions, Electrical Requirements, Settings, Features

Page 3

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Observe all governing codes and ordinances.

Required:

A 120 Volt, 60 Hz, AC only, 15- or 20-amp electrical supply with a fuse or circuit breaker.

Recommended:

A time-delay fuse or time-delay circuit breaker.

A separate circuit serving only this microwave oven.

GROUNDING INSTRUCTIONS

For all cord connected appliances:

The microwave oven must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. The microwave oven is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

WARNING: Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or serviceman if the grounding instructions are not completely understood, or if doubt exists as to whether the microwave oven is properly grounded.

Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the microwave oven.

SAVE THESE INSTRUCTIONS

This device complies with Part 18 of the FCC Rules.

Settings

Clock

The Clock is a 12-hour (12:00-11:59) clock, with A.M. and P.M. Touch CLOCK, enter time, then touch CLOCK or the Start control.

Timer (on some models)

Timer can be used independently during any cooking program. Touch the Timer control, enter time, then touch the Timer control or the Start control.

Control Lock

Activate to avoid unintended start. Touch and hold the Cancel control for about 3 seconds until 2 tones sound and padlock icon appears in the display. Repeat to unlock control.

Options or Setup

Vent Timer, Light Timer, Filter Reset, Sound On/Off, Scroll Speed, Demo Mode and Language (English or French) (on some models) may be changed.

Vent Fan

Various speeds, ranging from high to low, and off. Comes on automatically as cooling fan during any cook function.

Vent Timer (on some models): Set vent fan to run for exactly 30 minutes, or to run for only 30 minutes more (off after

30 minutes). The vent fan may be turned off at any time using the Vent Fan control. Touch the Options or Setup control to reach the “Vent Fan” submenu, and select the setting.

Light Timer

Set the cooktop light to turn on and off at certain times. Touch Options or Setup control to reach the “Light Timer” submenu, and set the Light On Time and Light Off Time in hours and minutes with A.M. or P.M.

Filter Reset

Reset the filter status after replacing and/or cleaning the filters. Touch Options or Setup control to reach the “Filter Reset” submenu and activate reset. See “Microwave Oven Care” section.

Tones

Programming tones and signals. Programming tones may be turned off, or all tones (including end-of-function signals) may be turned off. Touch the Options or Setup control to reach the “Sound On/Off” submenu, and turn tones off or on.

Scroll Speed

Scroll speed of the text may be adjusted. Touch the Options or Setup control to reach the “Scroll Speed” submenu, and select the scroll speed. Touch the Start control to set speed.

Demo Mode

Activate to practice using the control without actually turning on the magnetron or any heating element (on some models). Touch the Options or Setup control to reach the “Demo Mode” submenu, and activate or deactivate Demo Mode.

Features

Cooking Rack

Use the rectangular cooking rack only for 2-level cooking. To avoid damage to the microwave oven, always remove rack after 2-level cooking. To avoid damage to the microwave oven due to soil buildup, clean rack supports often.

Glide Tray

The glide tray (rectangular “turntable”) glides from side to side, and may be turned off (on some models) for manual cooking only. This is helpful when cooking with plates that are bigger than the glide tray, or when cooking with plates that are side by side. Glide tray cannot be turned off during preset or sensor (on some models) functions.

3

Image 3
Contents Important Safety Instructions Microwave Hood Combination SafetyW10336688A Important Safety Instructions Electrical Requirements SettingsFeatures Grounding InstructionsCookware and Dinnerware Microwave Oven UseMicrowave Oven Care Replacement Parts and Cleaning Supplies TroubleshootingThis limited warranty does not cover W10336688ASP PN W10336689A

W10336688A specifications

The Maytag W10336688A is a highly regarded appliance component designed to enhance the performance of your laundry experience. This replacement part is primarily associated with Maytag washing machines, serving as a crucial element that ensures your machine runs efficiently. One of the standout features of the W10336688A is its robust construction, designed to withstand the rigors of frequent use. The durability of materials used in this component ensures longevity, minimizing the likelihood of repair or replacement.

One of the significant technologies incorporated into the W10336688A is its compatibility with a range of Maytag washing machine models. It is engineered for seamless integration, making it a go-to solution for consumers looking to replace old or worn-out parts without needing to invest in a new appliance. This focus on compatibility makes it a versatile choice for many households.

The W10336688A also emphasizes ease of installation. Designed with the user in mind, it allows for straightforward replacement without requiring specialized tools or professional assistance. This feature is particularly appealing to DIY enthusiasts who prefer to handle repairs independently, ultimately saving on service costs.

In addition, the W10336688A benefits from Maytag's commitment to customer service. The company provides detailed instructions and support resources, ensuring that consumers can quickly get back to their laundry routines with minimal disruption. Moreover, it aligns with Maytag's reputation for reliability, offering peace of mind to consumers who value quality and performance in their appliances.

Another essential characteristic of the W10336688A is its energy efficiency. By ensuring that your washing machine operates at peak performance, this component helps facilitate better energy management, potentially leading to lower utility bills and a reduced environmental footprint.

In summary, the Maytag W10336688A is a vital replacement part for many Maytag washing machines, characterized by its durability, compatibility, ease of installation, and energy efficiency. With Maytag's commitment to quality and customer support, this component serves as an excellent solution for maintaining the efficiency and performance of your laundry appliance, ensuring that it continues to meet the demands of your household.