Troubleshooting

■Cooktop light: The cooktop light bulb is located on the underside of the microwave oven, and is replaceable. Remove bulb cover screw, and open the bulb cover. Replace bulb, close bulb cover, and secure with screw.

■Cavity light: The cavity light bulb is located behind the vent grille at the top front of the microwave oven, under the bulb cover, and is replaceable. Remove two screws on the vent grille, tilt the grille forward, and lift it out. Open bulb cover and replace bulb. Close bulb cover, replace vent grille, and secure with screws.

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service call.

www.maytag.com

Microwave oven will not operate

Check the following:

■Household fuse or circuit breaker

If a household fuse has blown or a circuit breaker has tripped, replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

■Magnetron

Try to heat 1 cup (250 mL) of cold water for 2 minutes at 100% cooking power. If water does not heat, try the steps in the bullets below. If microwave oven still does not operate, call for service.

■Door

Firmly close door. On some models, if a packaging spacer is attached to inside of the door, remove it, then firmly close door.

If a message about the door appears in the display, the door has been closed for 5 minutes or more without the microwave oven being started. This occurs to avoid unintended starting of the microwave oven. Open and close the door, then start

the cycle.

■Control

Make sure control is set properly. Make sure Control Lock is off. Make sure Demo Mode (on some models) is off.

Arcing in the microwave oven

Check the following:

■Soil buildup

Soil buildup on cavity walls, microwave inlet cover, cooking rack supports, and area where the door touches the frame can cause arcing. See “General Cleaning” in “Microwave Oven Care” section.

Display shows messages

■A flashing “:” or “PF” means there has been a power failure. Reset the clock.

■A letter followed by a number is an error indicator. Call for assistance.

Fan running during cooktop usage

■This is normal. The microwave oven’s cooling fan (on some models), which is separate from the vent fan, automatically comes on during microwave oven operation to cool the microwave oven. It may also automatically come on and cycle on and off to cool the microwave oven’s controls while the cooktop below is being used.

Radio, TV or cordless phone interference

Check the following:

■Proximity

Move the receiver away from the microwave oven, or adjust the radio or TV antenna.

■Soil

Make sure the microwave oven door and sealing surfaces are clean.

■Frequency

Some 2.4 GHz-based cordless phones and home wireless networks may experience static or noise while microwave oven is on. Use a corded phone, a different frequency cordless phone or avoid using these items during microwave oven operation.

Replacement Parts and Cleaning Supplies

Following is a list of available parts and supplies which may be purchased separately. Please refer to the cover for contact and model identification information.

Replacement Parts		Cleaning Supplies
■	Glide tray	■	Heavy Duty Degreaser
■	Glide tray support	■	All-Purpose Appliance Cleaner
■	Cooking rack	■ Stainless Steel Cleaner and Polish

■Rack clip

■Rack support

■Grease filter

■Charcoal filter

■Cooktop light bulb

■Cavity light bulb

W10336688A specifications

The Maytag W10336688A is a highly regarded appliance component designed to enhance the performance of your laundry experience. This replacement part is primarily associated with Maytag washing machines, serving as a crucial element that ensures your machine runs efficiently. One of the standout features of the W10336688A is its robust construction, designed to withstand the rigors of frequent use. The durability of materials used in this component ensures longevity, minimizing the likelihood of repair or replacement.

One of the significant technologies incorporated into the W10336688A is its compatibility with a range of Maytag washing machine models. It is engineered for seamless integration, making it a go-to solution for consumers looking to replace old or worn-out parts without needing to invest in a new appliance. This focus on compatibility makes it a versatile choice for many households.

The W10336688A also emphasizes ease of installation. Designed with the user in mind, it allows for straightforward replacement without requiring specialized tools or professional assistance. This feature is particularly appealing to DIY enthusiasts who prefer to handle repairs independently, ultimately saving on service costs.

In addition, the W10336688A benefits from Maytag's commitment to customer service. The company provides detailed instructions and support resources, ensuring that consumers can quickly get back to their laundry routines with minimal disruption. Moreover, it aligns with Maytag's reputation for reliability, offering peace of mind to consumers who value quality and performance in their appliances.

Another essential characteristic of the W10336688A is its energy efficiency. By ensuring that your washing machine operates at peak performance, this component helps facilitate better energy management, potentially leading to lower utility bills and a reduced environmental footprint.

In summary, the Maytag W10336688A is a vital replacement part for many Maytag washing machines, characterized by its durability, compatibility, ease of installation, and energy efficiency. With Maytag's commitment to quality and customer support, this component serves as an excellent solution for maintaining the efficiency and performance of your laundry appliance, ensuring that it continues to meet the demands of your household.