Ricoh GX100VF manual Troubleshooting, 186, Appendices, Error Messages

Models: GX100VF

1 218
Download 218 pages 53.66 Kb
Page 188
Image 188

7 Appendices

Appendices

7

Troubleshooting

Error Messages

If an error message is displayed on the screen, take the corresponding action.

Error Message

Cause and Action

Refer to

INSERT CARD

No card is loaded. Insert a card.

P.30

USE THE SETUP MENU TO SET

The date is not set. Set the date.

P.161

THE DATE.

 

 

FILE NUMBER OVER LIMIT

The file number limit has been exceeded. Use another card.

P.159

 

 

P.160

UNMATCHED FILE

The camera cannot display this file. Check the file contents

-

 

on your computer, and then delete the file.

 

INSUFFICIENT MEMORY.

Because there is not sufficient capacity on the card, all the

P.27

CONTINUE?

files cannot be copied. Use another card.

 

PROTECTED

You are trying to delete a protected file.

P.115

CARD IS WRITE-PROTECTED.

The card is “Locked (write-protected)”. Unlock the card.

P.27

PRINT SETTINGS CANNOT BE

This file (movie or other file) cannot be selected for printing.

-

SET FOR THIS FILE.

 

 

INSUFFICIENT MEMORY

Files cannot be stored. Make sure there is enough free

P.56

 

space or delete unwanted files.

P.137

 

 

P.138

 

The image print number limit has been exceeded. Select an

-

 

image and set the number to 0.

 

FORMAT INTERNAL MEMORY

You must format the internal memory.

P.138

INITIALIZE THE CARD.

The card is not formatted. Format the card with this camera.

P.137

CARD ERROR

Reformat the card. If, after doing so, the error message still

P.137

 

appears, the card may be faulty. Do not use the card.

 

WRITING TO DATA

Writing file to memory. Wait until writing finishes.

-

NO FILE

There are no files that can be played back.

-

CANNOT RECORD

The number of remaining shots is 0. Switch to another card

P.27

 

or the internal memory.

 

REMOVE LENS CAP.

The camera does not start because the lens cap is still on

P.32

 

the camera. Remove the lens cap.

 

REMOVE LENS CAP AND

The camera does not start because the lens cap is still on

P.32

PRESS PLAYBACK BUTTON.

the camera. Remove the lens cap and press the 6

 

 

(playback) button or the POWER button to turn on the

 

 

camera.

 

186

Page 188
Image 188
Ricoh GX100VF manual Troubleshooting, 186, Appendices, Error Messages