Ricoh GX100VF manual Press the FFlash button to change the flash mode

3 Press the F(Flash) button to change the flash mode.

• The flash mode mark is displayed momentarily at the center of the LCD monitor and then a smaller mark is displayed at the upper left of the screen.

•The auto focus/flash lamp blinks while the flash charges. Once the

flash is charged, the lamp turns off and the camera is ready to shoot.

Note ---------------------------------------------------------------------------------------------------

•When you are finished using the flash, press the center of the flash cover down with your finger.

•The flash mode setting is saved until you press the F (Flash) button again.

•The flash does not fire when shooting movies or in multi-shot mode.

•When using AAA alkaline batteries, Oxyride batteries, or nickel-hydrogen batteries, the LCD monitor turns off when the flash is charging.

•The flash fires a pre-flash to increase the AE accuracy.

•You cannot use the internal flash when using the external flash. (GP.201)

Caution-----------------------------------------------------------------------------------------------

•You cannot use the internal flash when using the wide conversion lens or hood.

•To use the internal flash with the LCD viewfinder attached, reposition the angle of the LCD viewfinder.

If you are using the camera for the first time, read this section.

45