Ricoh GX100VF manual 183, Disconnecting the Camera from Your Computer

Select [USB Mass Storage Device] and click [Stop].

Disconnecting the Camera from Your Computer

If images are downloaded using RICOH Gate La or the [Scanner and Camera Wizard], turn the camera off after downloading images and disconnect the USB cable.

Perform the following operations when disconnecting the camera from your computer. (The display shown below is when connected to Windows XP in [MASS STR]. The terms are different for other operating systems but the operations are the same.)

1 Double-click the [Safely Remove Hardware] icon at the right end of the task bar.

2

3 Check that [USB Mass Storage Device] is selected and click [OK].

4 Click [Close].

5 Disconnect the USB cable.

Note ----------------------------------------------------------------------------------------------

•If the USB cable is disconnected without disabling the connection, the Unsafe Removal of Device screen may be displayed.

•Be sure to stop the connection before removing the USB cable when connected in mass storage mode.

•Do not disconnect the USB cable during image downloading. Make sure that downloading has completed, disable the connection, and then disconnect the cable.

Downloading Images to Your Computer

6

183