Ricoh GX100VF manual Functions

Rotate the up-down dial to change the aperture value.

• When the exposure value is between
-2EV and +2EV, the brightness of the	+2EV
LCD monitor changes according to
the exposure value.
• When the exposure value exceeds
the range of -2EV to +2EV, the
indicator lights orange and the
brightness of the LCD monitor does
not change.	-2EV

1

2

3 Press the ADJ. lever to the left or right to change the shutter speed.

M

SD 9999 1280

F4.0

1/80

Various Shooting

4 Half-press the shutter release button.

5 Gently press the shutter release button all the way.

Note ----------------------------------------------------------------------------------------------

•To increase the exposure time, lower the shutter speed. In this case, camera shake may occur. Hold the camera steady with two hands or use a tripod when shooting.

•While shooting with a slow shutter speed, the LCD monitor turns off.

•When the ISO setting is set to [AUTO] or [AUTO-HI] in manual exposure mode, the ISO is fixed at ISO 100.

•AE LOCK does not work in manual exposure mode even if the Fn (Function) button is assigned to [AE LOCK]. When the Fn (Function) button is pressed, the value is automatically set closer to the appropriate exposure (closer to the adjust of the exposure value indicator). This is useful when, for example, you want to change/adjust the exposure value from closer to the center of the exposure value indicator (the appropriate exposure).

Caution------------------------------------------------------------------------------------------

•When the shutter speed is set to 15 or more seconds, the function to remove noise from images operates. Therefore, the time until image recording is complete is about twice the set shutter speed plus about 8 seconds.

•When the shutter speed is set to 1 or more seconds, the camera shake correction function cannot be used. When the shutter speed is set to 1 or more seconds while the camera shake correction function is turned on, Echanges to F.

Functions

73