Ricoh GX100VF manual Changing the Shutter Release Button Setting ADJ Shtr BTN SET, 149

Changing the Shutter Release Button Setting (ADJ SHTR BTN SET)

In ADJ. mode (GP.64), you usually press the MENU/OK button or the ADJ. lever to set a setting.

When [ADJ SHTR BTN SET] is set to [ON], you can also set a setting by half-pressing the shutter release button.

Available Settings	Description
ON	Press the MENU/OK button or half-press the shutter release
	button to set the setting.
OFF *Default setting	Press the MENU/OK button to set the setting.

To change the shutter release button setting, follow the steps below.

1 Display the SETUP menu.

• For the operating procedure, see P.135.

2 Press the " button to select [ADJ SHTR BTN SET.] and press the $ button.

3 Press the !" buttons to select the desired setting.

4 Press the MENU/OK button, or press the # button and then the MENU/OK button.

5

Changing Camera Settings

149