ENGLISH
2-3. SPEAKERS LEVEL SETTING WITH TEST TONE
Here you will set the volume for each speaker so that they are all heard by the listener at the same level. Moreover, if the T.TONE button is pressed, unit can enter into this menu directly.
Note:
The speaker level settings are not available in 7.1 Channel Input mode, CS mode and Multi Channel Stereo mode.
T(TEST) MODE :
Selects “MANUAL” or “AUTO” for generating mode of test tone 1 or 2 cursor button.
1. When you select “MANUAL” in
2. Using the 1 and 2 cursor buttons, adjust the volume level of the noise from the center speaker so that it is the same level as the front left speaker (Note that this can be adjusted to any level between
MENU STRUCTURE of Speaker Level setup
Direct selec | Speakers |
|
|
|
by remote | Distance | Test Tone mode |
| |
control | setup |
| ||
|
| MANU | AUTO |
|
|
|
| (Auto) |
|
|
| Speaker |
|
|
|
|
| SW |
|
| Speakers | L | C | R |
| Level setup | |||
|
|
|
| |
|
|
| Listening |
|
|
| SL | Positiom | SR |
If you select “AUTO” by pressing the 4 button, the test tone will be cycled through in a circular pattern which is L (Left) → C (Center) → R (Right) → SR (Surround Right) → SBR (Surround Back Right) → SBL (Surround Back Left) → SL (Surround Left) → SW (Subwoofer) → L →.. increments of 2 seconds for each channel.
Using the 1 and 2 cursor buttons, adjust the volume level of the noise from the speaker so that it is the same level for all speaker.
Press the ENTER button, you can stop the test tone mode. Or press the 1 or 2 cursor button to select “EXIT” then press the ENTER button to exit the
SETUP MENU.
Or press the 1 or 2 cursor button to select “RETURN” then press the ENTER button to return the previous
Maximum
1 dB interval
Reference
1 dB interval
Minimum
+10dB
+9dB
button
0dB
button
(SW
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SBL |
|
|
| SBR |
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TO MAIN MENU |
|
|
|
| RETURN |
|
|
|
| EXIT |
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
| |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
| |||||||||||
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||
| MAIN |
|
| Speakers |
|
| exit SETUP |
|
| ||||||||||||
| MENU |
| Distance setup |
|
|
| MENU |
|
| ||||||||||||
2-4. SPEAKERS LEVEL SETTING WITHOUT TEST TONE
If you select “MANUAL”, adjust the output level of each speaker as follow.
1. 3. 5. 1. 5. 1. 2. 5. 5.
AV SURROUND RECEIVER SR3001
INPUT SELECTOR
3. Press the 4 cursor button again. This unit will now emit the pink noise from the front right speaker.
4. Repeat steps 2 and 3 above for the front right and other speakers until all speakers are adjusted to the same volume level.
Channel level (speaker level) can be adjusted without using test tone.
Note:
Four channel level settings can be memorized for reproduction: the 7.1 ch input mode, CS mode, Multi channel stereo mode, and all other surround modes,
|
|
|
|
|
|
|
|
|
|
|
|
| SURROUND | 5. | |
|
| DISP | MULTI | AUTO | TUNED | ST | V – OFF | NIGHT | PEAK | ATT | ANALOG |
| |||
|
| SLEEP | AUTO SURR | DIRECT | DISC 6.1 | MTX 6.1 |
| EQ | DIGITAL | DIGITAL |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
| L | R |
|
|
|
|
|
|
|
|
|
|
|
|
| AAC PCM |
|
|
|
| SURROUND | PURE |
| SIMPLE |
|
|
|
|
|
|
|
|
|
| |
| MODE | DIRECT |
| SETUP |
|
|
|
|
|
| DISPLAY |
| MEMORY | CLEAR | |
7.1CH INPUT | S. SPEAKER B |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
STANDBY |
|
|
|
|
|
|
| ENTER |
|
|
|
|
|
| |
| AUTO |
| MENU |
|
|
|
|
|
| EXIT |
| BAND | |||
POWER ON/OFF | PHONES |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Press the ENTER button, you can stop the test tone mode. Or press the 1 or 2 cursor button to select “EXIT” then press the ENTER button to exit the SETUP MENU.
Or press the 1 or 2 button to select “RETURN” then press the ENTER button to return the previous
respectively.
1. Set the surround mode or 7.1 ch input mode which you want to adjust the channel level.
2. Press the CH.SEL button on the remote.
|
|
|
|
|
|
| Notes: |
|
|
| AUX1 | AMP |
|
| • Speakers that you selected “None” for in the Speaker |
2. | 5. | TV |
|
| MAIIN |
| Size Setup menu will not appear. |
VOL. | SLEEP | MUTE | VOL. |
|
| ||
|
|
|
|
| • The setup level for each channel is memorized for | ||
1. 5. |
| OSD | MENU |
| reproduction in all surround mode by this method | ||
|
|
|
|
| exclude CS mode, Multi channel stereo mode and | ||
|
|
| ENTER |
|
| 7.1 ch input mode. | |
1. 3. 5. |
| SET UP/ |
|
| 5. | • To adjust the speaker levels for | |
| MENU OFF |
| sources, you will need to use the 7.1CH Level Input | ||||
| T.TONE |
| |||||
|
| PURE DIRECT AUTO |
| DTS | |||
|
|
| 1 | 2 | 3 |
| setup menu. |
|
| NIGHT | CSII | EX/ES | VIRTUAL |
|
|
|
|
| 4 | 5 | 6 |
|
|
3. Select the desired channel (speaker) with the 1 or 2 cursor buttons.
4. Adjust the level with the 3 or 4 cursor buttons.
5. After completing the setup, press the CH.SEL button again.
20
