Marantz SR3001 manual PL Iidolby PRO Logic, Music Parameter, Tune the soundfield as follows

ENGLISH	5. PL II(DOLBY PRO LOGIC II)
	MUSIC PARAMETER
	Pro Logic II-Music mode creates a rich and
	enveloping surround ambience from stereo sources
	such as CDs.

C WIDTH:

Set the Center width level between 0 and 7 level in 1 level interval with 1 or 2 cursor button.

Center Width allows you to gradually spread the center channel sound into the front left and right speakers.

6. CS II (CIRCLE SURROUND II)			MENU STRUCTURE of CS II setup
1. 3. 5.	4. 5.	2. 5.
				6.CS II setup	TRUBASS	0 6

D RECEIVER SR3001

In this mode, SR3001 includes three controls to fine-
tune the soundfield as follows.
1. 3. 5.	4. 5.	2. 5.

D RECEIVER SR3001

DISP

MULTI

AUTO

TUNED

ST

V – OFF

NIGHT

PEAK

ATT

ANALOG

SURROUND

SLEEP

AUTO SURR

DIRECT

DISC 6.1

MTX 6.1

EQ

DIGITAL

DIGITAL

L

R

AAC PCM

DO

At its widest setting, all the sound from the center is mixed into the left and right.

This control may help achieve a more spacious sound or a better blend of the front image.

If “NONE” was selected for the Center speaker setting in the Speaker size, then this setting will not appear.

MENU STRUCTURE of PRO LOGIC II setup

EAKER

ES

DISP

MULTI

AUTO

TUNED

ST V – OFF

NIGHT

PEAK

ATT

ANALOG

SURROUND

SLEEP

AUTO SURR

DIRECT

DISC 6.1

MTX 6.1

EQ

DIGITAL

DIGITAL

L

R

AAC PCM

DO

SURROUND

PURE

SIMPLE

MODE

DIRECT

SETUP

DISPLAY

MEMORY

CLEAR

ENTER

AUTO

HT-EQ

MENU

EXIT

BAND

T-MODE

SRS DIALOG 0 6

TO MAIN MENU EXIT

exit SETUP

MENU

SURROUND	PURE	SIMPLE
MODE	DIRECT	SETUP	DISPLAY	MEMORY	CLEAR
EAKER
			ENTER
AUTO	HT-EQ	MENU	EXIT	BAND	T-MODE
ES

4. 5.	TV		MAIN
	VOL.	SLEEP	MUTE VOL.
	OSD		MENU
1. 3. 5.		ENTER
	SET UP/		MENU OFF	2. 5.
	T.TONE
	PURE DIRECT	AUTO	DTS

1. Select “5.PLII MUSIC PARAMETER” in SETUP MENU with 3 or 4 cursor button.

2. Press the ENTER button to enter the menu.

3. Press 3 or 4 cursor button to select a desired item.

4. Press 1 or 2 cursor button to select the mode or set the level.

5. When you select “TO MAIN MENU” by pressing the 3 or 4 button, you can return the SETUP MENU by pressing the ENTER button.

Or press the 1 or 2 cursor button to select “EXIT” then press the ENTER button to exit the

SETUP MENU.

PANORAMA:

Select the Panorama mode On or Off with 1 or 2 cursor button.

Panorama wraps the sound of the front left and right speakers around you for an exciting perspective.

DIMENSION:

Set the Dimension level between 0 and 6 level in 1 level interval with 1 or 2 cursor button.

Adjust the soundfield either towards the front or towards the rear.

This can be useful to help achieve a more suitable balance from all the speakers with certain recordings.

5.PRO LOGIC II PARAMETER DEFAULT

CUSTOM

PANORAMA				OFF
				ON
DIMENSION			0	6
C-WIDTH			0	7
TO MAIN MENU		EXIT
	exit SETUP
		MENU

4. 5.	TV		MAIN
	VOL.	SLEEP	MUTE VOL.
	OSD		MENU
1. 3. 5.		ENTER
	SET UP/		MENU OFF	2. 5.
	T.TONE
	PURE DIRECT	AUTO	DTS

1. Select “6. CS II” in SETUP MENU with 3 or 4 cursor button.

2. Press the ENTER button to enter this menu.

3. Press 3 or 4 cursor button to select desired item.

4. Press 1 or 2 cursor button to set the level.

5. When you select “TO MAIN MENU” by pressing the 3 or 4 button, you can return the SETUP MENU by pressing the ENTER button.

Or press the 1 or 2 cursor button to select “EXIT” then press the ENTER button to exit the

SETUP MENU.

TRUBASS:

Set the TRUBASS level between 0 and 6 level in 1 level interval with 1 or 2 cursor button. TRUBASS produced by the speakers to be an octave below the actual physical capabilities of the speakers adding exciting, deeper bass effects.

SRS DIALOG:

Set the SRS DIALOG level between 0 and 6 level in 1 level interval with 1 or 2 cursor button.

This can be popped out of the surround audio effects allowing the listener to easily discern what the actors say.

If “NONE” was selected for the Center speaker setting in the Speaker size, then this setting will not appear.

22