CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT SAFETY

INSTRUCTIONS

READ BEFORE OPERATING EQUIPMENT

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

NOTE TO CATV SYSTEM INSTALLER:

This reminder is provided to call the CATV (Cable-TV) system installer’s attention to Section 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precau- tions which you should be particularly aware of.

1.

Read Instructions – All the safety and

 

operating instructions should be read before

 

the product is operated.

2.

Retain Instructions – The safety and

 

operating instructions should be retained for

 

future reference.

3.

Heed Warnings – All warnings on the product

 

and in the operating instructions should be

 

adhered to.

4.

Follow Instructions – All operating and use

 

instructions should be followed.

5.

Cleaning – Unplug this product from the

 

wall outlet before cleaning. Do not use liquid

 

cleaners or aerosol cleaners. Use a damp

 

cloth for cleaning.

6.

Attachments – Do not use attachments not

 

recommended by the product manufacturer

 

as they may cause hazards.

7.

Water and Moisture – Do not use this product

 

near water-for example, near a bath tub,

 

wash bowl, kitchen sink, or laundry tub, in a

 

wet basement, or near a swimming pool, and

 

the like.

9.A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

10.Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

11.Power Sources – This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These lim- its are designed to provide reasonable protection against harmful interference in a residential instal- lation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica- tions. However, there is no guarantee that interfer- ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter- mined by tuning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is con- nected.

-Consult the dealer or an experienced radio/TV technician for help.

NOTE:

Changes or modifi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

8. Accessories – Do not place this product on

an unstable cart, stand, tripod, bracket, or

table. The product may fall, causing serious

injury to a child or adult, and serious damage

to the product. Use only with a cart, stand,

tripod, bracket, or table recommended by the

manufacturer, or sold with the product. Any

mounting of the product should follow the

manufacturer’s instructions, and should use

a mounting accessory recommended by the

manufacturer.

Page 2
Image 2
Marantz SR3001 manual Read Before Operating Equipment

SR3001 specifications

The Marantz SR3001 is a versatile and feature-rich AV receiver that epitomizes the brand’s commitment to high-quality audio performance and user-friendly functionality. Launched as part of Marantz's celebrated line of home theater products, the SR3001 is designed to deliver an immersive audio experience, making it a popular choice among home theater enthusiasts and music lovers alike.

One of the standout features of the SR3001 is its impressive power output, providing users with a robust 75 watts per channel across five channels. This power ensures that your home theater setup can deliver dynamic soundscapes, whether you’re watching films or enjoying your favorite music. The receiver also supports multi-channel audio formats, allowing for a true surround sound experience that enhances the atmosphere of movies and music performances.

The SR3001 incorporates Marantz's proprietary HDAM (Hyper Dynamic Amplification Module) technology, which significantly improves audio detail and dynamic range. This technology minimizes noise and distortion, resulting in clean, high-fidelity sound reproduction that appeals to audiophiles and casual listeners alike. Furthermore, the receiver is equipped with a high-quality DAC (digital-to-analog converter), which ensures that digital audio sources maintain their integrity and richness.

Connectivity is another strong suit of the Marantz SR3001. The receiver features numerous inputs and outputs, including multiple HDMI inputs, component video, composite video, and digital audio connections. This extensive range of connectivity options allows users to connect various devices, including Blu-ray players, gaming consoles, and streaming devices, facilitating an integrated home entertainment setup.

For added convenience, the SR3001 includes an intuitive on-screen display, enabling users to easily navigate through settings, select sources, and customize audio preferences. The receiver also supports various surround sound formats, including Dolby Digital and DTS, ensuring compatibility with most modern audio and video formats.

In terms of design, the Marantz SR3001 showcases the brand's classic aesthetic, with a sleek black finish and an easy-to-read front panel. It not only performs well but also complements a home entertainment setup stylishly.

Overall, the Marantz SR3001 stands out as a high-performance AV receiver, providing robust audio output, advanced technologies, and thoughtful design. Whether you're creating a dedicated home theater or simply looking to enhance your music listening experience, the SR3001 is a remarkable choice that brings professional audio quality into the comfort of your home.