Maytag W10208080A, W10208076A important safety instructions Electrical Requirements, Settings

Page 3

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Observe all governing codes and ordinances.

Required:

A 120 Volt, 60 Hz, AC only, 15- or 20-amp electrical supply with a fuse or circuit breaker.

Recommended:

A time-delay fuse or time-delay circuit breaker.

A separate circuit serving only this microwave oven.

GROUNDING INSTRUCTIONS

For all cord connected appliances:

The microwave oven must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. The microwave oven is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

WARNING: Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or serviceman if the grounding instructions are not completely understood, or if doubt exists as to whether the microwave oven is properly grounded.

Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the microwave oven.

SAVE THESE INSTRUCTIONS

This device complies with Part 18 of the FCC Rules.

Settings

Clock

The Clock is a 12-hour (12:00-11:59) clock, with A.M. and P.M. Touch CLOCK, enter time, then touch CLOCK or the Start control.

Timer (on some models)

Timer can be used independently during any cooking program. Touch the Timer control, enter time, then touch the Timer control or the Start control.

Control Lock

Activate to avoid unintended start. Touch and hold the Cancel control for about 3 seconds until 2 tones sound and padlock icon appears in the display. Repeat to unlock control.

Options or Setup

Vent Timer, Light Timer, Filter Reset, Sound On/Off, Scroll Speed, Demo Mode and Language (English or French) may be changed.

Vent Fan

Various speeds, ranging from high to low, and off. Comes on automatically as cooling fan during any cook function.

Vent Timer (on some models): Set vent fan to run for exactly 30 minutes, or to run for only 30 minutes more (off after

30 minutes). The vent fan may be turned off at any time using the Vent Fan control. Touch the Options or Setup control to reach the “Vent Fan” submenu, and select the setting.

Light Timer

Set the cooktop light to turn on and off at certain times. Touch Options or Setup control to reach the “Light Timer” submenu, and set the Light On Time and Light Off Time in hours and minutes with A.M. or P.M.

Filter Reset

Reset the filter status after replacing and/or cleaning the filters. Touch Options or Setup control to reach the “Filter Reset” submenu and activate reset. See “Microwave Oven Care” section.

Tones

Programming tones and signals. Programming tones may be turned off, or all tones (including end-of-function signals) may be turned off. Touch the Options or Setup control to reach the “Sound On/Off” submenu, and turn tones off or on.

Scroll Speed

Scroll speed of the text may be adjusted. Touch the Options or Setup control to reach the “Scroll Speed” submenu, and select the scroll speed. Touch the Start control to set speed.

Demo Mode

Activate to practice using the control without actually turning on the magnetron or any heating element (on some models). Touch the Options or Setup control to reach the “Demo Mode” submenu, and activate or deactivate Demo Mode.

3

Image 3
Contents W10208076A Microwave Hood Combination SafetyImportant Safety Instructions Electrical Requirements SettingsAccessories FeaturesMicrowave Oven Use Cookware and DinnerwareMicrowave Oven Care TroubleshootingReplacement Parts, Accessories and Cleaning Supplies This limited warranty does not cover W10208076ASP PN W10208080A

W10208080A, W10208076A specifications

The Maytag W10208080A and W10208076A are two essential components designed to enhance the performance and longevity of Maytag appliances, particularly washers and dryers. As authentic OEM parts, they ensure optimal compatibility and reliability, crucial for appliance maintenance and performance.

The Maytag W10208080A serves as a critical part in various washing machines, particularly in facilitating the functioning of the water inlet valve. This component is responsible for regulating water flow into the washer, ensuring the correct amount of water is used for every cycle. Its design emphasizes durability, which is vital for maintaining a consistent supply of water while preventing leaks or malfunctions that could disrupt laundry routines. The installation of this part typically improves efficiency during wash cycles, allowing users to save both time and water.

On the other hand, the W10208076A is specifically designed for applications involving the dryer, often playing a vital role in the dryer’s venting system. This part ensures that hot, moist air is ventilated effectively, promoting optimal drying performance while minimizing energy consumption. One of its standout features is its ability to prevent clogs, which can lead to reduced efficiency or even fire hazards in extreme cases. When maintained or replaced regularly, this component can significantly enhance the appliance's performance and lifespan.

Both parts incorporate advanced engineering technologies that focus on improving reliability and performance. The materials used in their construction are often selected for their resilience against wear and tear, heat, and corrosion, making them suitable for the demanding environments found in everyday laundry routines.

These components not only extend the life of the appliances but also contribute to energy efficiency, allowing homeowners to reduce their utility bills while maintaining high performance in washing and drying clothes. Overall, the Maytag W10208080A and W10208076A are essential for anyone seeking to enhance their laundry experience through reliable and efficient appliance operation. Investing in these genuine parts ensures that your Maytag appliances continue to perform at their best.