Maytag MMV5208WS Venting Design Specifications, For optimal venting installation, we recommend

Page 11

VENTING DESIGN SPECIFICATIONS

This section is intended for architectural designer and builder/ contractor reference only.

NOTES:

Vent materials needed for installation are not provided with microwave hood combination.

We do not recommend using a flexible metal vent.

To avoid possible product damage, be sure to vent air outside, unless using recirculation installation. Do not vent exhaust air into concealed spaces, such as spaces within walls or ceilings, attics, crawl spaces or garages.

For optimal venting installation, we recommend:

using roof or wall caps that have back draft dampers

using a rigid metal vent

using the most direct route by minimizing the length of the vent and number of elbows to provide efficient performance

using uniformly sized vents

using duct tape to seal all joints in the vent system

using caulking compound to seal exterior wall or roof opening around cap

not installing 2 elbows together, for optimal hood performance

If venting through the wall, be sure that there is proper clearance within the wall for the damper to open fully.

If venting through the roof, and rectangular to round transition is used, be sure there is at least 3" (7.6 cm) of clearance between the top of the microwave oven and the transition piece. See “Rectangular to Round Transition” illustration.

Rectangular to Round Transition

NOTE: The minimum 3" (7.6 cm) clearance must exist between the top of the microwave oven and the rectangular to round transition piece so that the damper can open freely and fully.

A

B

C

D

 

 

E

3" (7.6 cm)

F

A. Roof cap

B. 6" (15.2 cm) min. diameter round vent C. Elbow (for wall venting only)

D. Wall cap

E. 3¹⁄₄" x 10" to 6" (8.3 x 25.4 cm to 15.2 cm) rectangular to round transition piece

F. Vent extension piece, at least 3" (7.6 cm) high

Recommended Standard Fittings

The following length equivalents are for use when figuring vent length. See the examples in “Recommended Vent Length.”

ABC

Roof venting

Roof cap

Wall venting

Wall cap

DEFG

A. Rectangular to round transition piece: 3¹⁄₄" x 10" to 6" = 5 ft (8.3 x 25.4 cm to 15.2 cm = 1.5 m)

B. Roof cap: 3¹⁄₄" x 10" = 24 ft (8.3 x 25.4 cm = 7.3 m)

C. 90° elbow: 3¹ " x 10" = 25 ft (8.3 x 25.4 cm = 7.6 m)

D. 90° elbow: 6" = 10 ft (15.2 cm = 3 m)

E. Wall cap: 3¹⁄₄" x 10" = 40 ft (8.3 x 25.4 cm = 12.2 m)

F. 45° elbow: 6" = 5 ft (15.2 cm = 1.5 m)

G. 90° flat elbow: 3¹⁄₄" x 10" = 10 ft (8.3 x 25.4 cm = 3 m)

11

Image 11
Contents Microwave Hood Combination Safety Microwave Hood Combination Installation InstructionsLocation Requirements Installation RequirementsTools and Parts Remove Cardboard TemplateRecommended Product Dimensions Electrical RequirementsInstallation Dimensions RequiredRotate Blower Motor Installation InstructionsWall Venting Installation Only Remove Mounting PlateRoof Venting Installation Only Wall Stud at One End Hole Wall Studs at Both End Holes Possible Wall Stud ConfigurationsLocate Wall Studs No Wall Studs at End HolesDrill Holes in Rear Wall Installation for No Wall Studs at End Holes Figures 1Mark Rear Wall Prepare Upper Cabinet Attach Mounting Plate to WallFor Roof Venting Installation Only Install Damper AssemblyInstall the Microwave Oven Complete Installation Recommended Standard Fittings Venting Design SpecificationsFor optimal venting installation, we recommend Rectangular to Round TransitionAssistance AccessoriesReplacement Parts

MMV5208WS specifications

The Maytag MMV5208WS is a powerful and versatile microwave that brings efficiency and practicality to your kitchen. With an array of features designed to enhance cooking performance, this model is an ideal companion for anyone looking to streamline meal preparation.

One of the standout characteristics of the MMV5208WS is its spacious 2.0 cubic foot capacity, which provides ample space for cooking a variety of dishes. This size makes it suitable for families or individuals who frequently prepare large portions or use oversized containers. The microwave has a robust 1000 watts of cooking power, ensuring that your food is heated evenly and quickly.

Equipped with an innovative sensor cooking technology, the MMV5208WS automatically detects the moisture level in food. This feature adjusts cooking times and power levels, eliminating the guesswork and ensuring perfectly cooked meals every time. Additionally, the microwave features a range of pre-programmed settings for tasks including popcorn, beverages, and baked potatoes, making meal prep even more straightforward.

Another key feature of this microwave is its easy-to-read digital controls. These controls simplify operation and allow users to input their desired settings efficiently. The brightly lit LED display enhances visibility, ensuring that you can track cooking times without any hassle.

The Maytag MMV5208WS also boasts a sleek stainless steel finish, enhancing the aesthetic appeal of your kitchen while ensuring durability and easy cleaning. The microwave’s design includes a quiet ventilation system that effectively removes smoke and odors from your kitchen without excessive noise, contributing to a more pleasant cooking environment.

Moreover, with its built-in invert technology, the MMV5208WS maintains consistent power levels, resulting in more thorough and even cooking. The microwave also includes a convenient microwave popcorn setting that allows you to enjoy perfectly popped corn without any burnt kernels.

In conclusion, the Maytag MMV5208WS is a reliable and efficient microwave oven that combines advanced technology, ample cooking capacity, and user-friendly features. It is designed to suit the demands of modern kitchens, making it an excellent choice for anyone looking to improve their cooking experience.