Maytag MMV5208WS installation instructions Attach Mounting Plate to Wall, Prepare Upper Cabinet

Page 8

Installation for Wall Stud at One End Hole (Figure 3)

1.Drill a 3/16" (5 mm) hole into the wall stud at the end hole marked in Step 3 of “Mark Rear Wall.”

2.If installing on a second wall stud, drill a 3/16" (5 mm) hole into the wall stud at the other hole marked in Step 6 of “Mark Rear Wall.” Refer to Figure 3 in “Possible Wall Stud Configurations” in “Locate Wall Stud(s)” section.

3.Drill a 3/4" (19 mm) hole through the wall at the other end hole.

Installation for Wall Studs at Both End Holes (Figure 4)

Drill 3/16" (5 mm) holes into the studs at the end holes marked in Step 3 of “Mark Rear Wall.”

Attach Mounting Plate to Wall

NOTE: Secure the mounting plate to the wall at both end holes drilled into the wall studs and/or drywall using either 1/4-20 x 3" round-head bolts and toggle nuts or 1/4 x 2" lag screws.

Refer to illustrations in “Possible Wall Stud Configurations” in “Locate Wall Stud(s)” section.

No Wall Studs at End Holes (Figures 1 & 2)

NOTE: The mounting plate must be secured to the wall on at least 1 wall stud as well as at both ends.

1.With the support tabs of the mounting plate facing forward, insert 1/4-20 x 3" round-head bolts through both end holes of mounting plate.

2.Start toggle nuts on bolts from the back of the mounting plate. Leave enough space for the toggle nuts to go through the wall and to open.

B

A

C

A. 1/4-20 x 3" round-head bolt

B. Mounting plate

C. Spring toggle nut

3.Position mounting plate on the wall.

4.Push the 2 bolts with toggle nuts through the drywall, and finger tighten the bolts to make sure toggle nuts have opened against drywall.

C

A

B

D

A. 1/4-20 x 3" round-head bolt

B. Mounting plate

C. Spring toggle nut

D. Drywall

5.Insert lag screw(s) into the hole(s) drilled into wall stud(s) in Step 2 of “Installation for No Wall Studs at End Holes” in the “Drill Holes in Rear Wall” section.

6.Check alignment of mounting plate, making sure it is level.

7.Securely tighten all lag screws and bolts.

Wall Stud at One End Hole (Figure 3)

1.With the support tabs of the mounting plate facing forward, insert a 1/4-20 x 3" round-head bolt through the end hole that fits over the 3/4" (19 mm) hole drilled in Step 3 of “Installation for Wall Stud at One End Hole” in the “Drill Holes in Rear Wall” section.

2.Start a toggle nut on the bolt from the back of the mounting plate. Leave enough space for the toggle nut to go through the wall and to open.

3.Position mounting plate on the wall.

4.Push the bolt with toggle nut through the drywall, and finger tighten the bolt to make sure toggle nut has opened against drywall.

5.Insert a lag screw into the remaining end hole.

6.If installing on a second wall stud, insert a lag screw into the other hole drilled in Step 2 of “Installation for Wall Stud at One End Hole” in the “Drill Holes in Rear Wall” section.

7.Check alignment of mounting plate, making sure it is level.

8.Securely tighten the lag screw(s) and bolt.

Wall Studs at Both End Holes (Figure 4)

1.Position mounting plate on the wall.

2.Insert lag screws into both end holes.

3.Check alignment of mounting plate, making sure it is level.

4.Securely tighten the lag screws.

Prepare Upper Cabinet

1.Disconnect power to outlet.

2.Remove all contents from upper cabinet.

3.Place Upper Cabinet Template against the bottom of the upper cabinet, and attach with tape or thumbtacks. Make sure the template centerline aligns with the vertical centerline on the rear wall.

The “rear wall” arrows must be against the rear wall so that the holes cut into the upper cabinet align with the holes in the top of the microwave oven.

NOTE: If the upper cabinet has a frame around it, trim the template edges so that it fits inside the frame, against the upper cabinet bottom. The template has trim lines to use as guides.

4.Make sure the 10" (25.4 cm) dimension from the rear wall to points “D” and “E” on the template is maintained.

Upper-cabinet template

 

D

 

E

10"

G

10"

(25.4 cm)

(25.4 cm)

 

F

 

8

Image 8
Contents Microwave Hood Combination Installation Instructions Microwave Hood Combination SafetyInstallation Requirements Tools and PartsRemove Cardboard Template Location RequirementsProduct Dimensions Electrical Requirements Installation DimensionsRequired RecommendedInstallation Instructions Wall Venting Installation OnlyRemove Mounting Plate Rotate Blower MotorRoof Venting Installation Only Possible Wall Stud Configurations Locate Wall StudsNo Wall Studs at End Holes Wall Stud at One End Hole Wall Studs at Both End HolesDrill Holes in Rear Wall Installation for No Wall Studs at End Holes Figures 1Mark Rear Wall Attach Mounting Plate to Wall Prepare Upper CabinetFor Roof Venting Installation Only Install Damper AssemblyInstall the Microwave Oven Complete Installation Venting Design Specifications For optimal venting installation, we recommendRectangular to Round Transition Recommended Standard FittingsAssistance AccessoriesReplacement Parts

MMV5208WS specifications

The Maytag MMV5208WS is a powerful and versatile microwave that brings efficiency and practicality to your kitchen. With an array of features designed to enhance cooking performance, this model is an ideal companion for anyone looking to streamline meal preparation.

One of the standout characteristics of the MMV5208WS is its spacious 2.0 cubic foot capacity, which provides ample space for cooking a variety of dishes. This size makes it suitable for families or individuals who frequently prepare large portions or use oversized containers. The microwave has a robust 1000 watts of cooking power, ensuring that your food is heated evenly and quickly.

Equipped with an innovative sensor cooking technology, the MMV5208WS automatically detects the moisture level in food. This feature adjusts cooking times and power levels, eliminating the guesswork and ensuring perfectly cooked meals every time. Additionally, the microwave features a range of pre-programmed settings for tasks including popcorn, beverages, and baked potatoes, making meal prep even more straightforward.

Another key feature of this microwave is its easy-to-read digital controls. These controls simplify operation and allow users to input their desired settings efficiently. The brightly lit LED display enhances visibility, ensuring that you can track cooking times without any hassle.

The Maytag MMV5208WS also boasts a sleek stainless steel finish, enhancing the aesthetic appeal of your kitchen while ensuring durability and easy cleaning. The microwave’s design includes a quiet ventilation system that effectively removes smoke and odors from your kitchen without excessive noise, contributing to a more pleasant cooking environment.

Moreover, with its built-in invert technology, the MMV5208WS maintains consistent power levels, resulting in more thorough and even cooking. The microwave also includes a convenient microwave popcorn setting that allows you to enjoy perfectly popped corn without any burnt kernels.

In conclusion, the Maytag MMV5208WS is a reliable and efficient microwave oven that combines advanced technology, ample cooking capacity, and user-friendly features. It is designed to suit the demands of modern kitchens, making it an excellent choice for anyone looking to improve their cooking experience.