Installation Instructions
Junction Box Connection
Junction box is not supplied with cooktop. Junction box must be U.L. or C.S.A. listed and meet NEC and Mobile Home Manufactures Association Standards.
•
•
•Refer to local, municipal, and stae building codes.
NOTE: A power cord must not be used.
Red House
Wire
Black | White |
House Wire | House Wire |
Red |
| White | |
Cooktop Wire |
| Cooktop Wire | |
Black |
| Green | |
Cooktop Wire | |||
Cooktop Wire | |||
|
| ||
3 - Wire Electrical Installation | |||
| United Sates Only | ||
Notice To Installer
Follow accompanying instruction carefully.
!CAUTION
Never use a metal blade to pry knob off. If knob cannot be easily removed, tuck folds of a dish- towel under knob skirt and pull upward with steady, even pressure.
Preparation Of Countertop
The cutout in the countertop into which the appliance is to be installed should be prepared according to the cutout dimensions given on page 1 of these instructions.
!CAUTION
Cutout dimensions are critical. Dimensions must be measured and cut accurately to within + 1/16" (.16 cm) to insure proper fit.
Installation Of Appliance
1.Remove the cooktop from the carton and place it upside down over two soft pads making sure control knobs do not interfere with any surface.
2.Provide cutout in countertop.
3.Place unit in the cutout.
4.Make electrical wire connection to unit. Consult local codes for proper power
5.Test to insure control knobs operate all elements properly.
Red House
Wire
Black
House Wire
Red
Cooktop Wire
Black
Cooktop Wire
Green
House Wire
White
House Wire
White
Cooktop Wire
Green
Cooktop Wire
Refer to the following Installation Instructions for detailed information on installing units.
•AKT3040* and AKT3640* – 8101P469
•CEC1430AA, CEC1536AA, JEC7430AA, and MEC4430BD – 8101P480
•JEC8430AD, JEC8536AD – 8101P503
•JEC9530AD, JEC9536AD – 8101P495
•MEC5430BD and MEC5536BA – 8101P478
4 - Wire Electrical Installation United States or Canada
©2003 Maytag Appliances Company | 16022159 Rev. 0 |