Extron electronic TP Receivers user manual Furniture mounting, #70-077-01 all other models

TP R 15HD A only — For optional rack mounting, mount the receiver on a VersaTools 3.5" deep 1U Rack Shelf (Extron part

#60-190-20)(figure 2-4). The TP R 15HD A mounts in one of four locations on the rack.

RGB

LEVEL

TPPEAK
R	ING
	15H
	DA

VersaTools Rack Shelf

1/4 Rack Width False Front Face Plate

RGB

LEVEL

TPPEAK
R	ING
	15H
	DA

Use 2 Mounting Holes on Opposite Corners

RGB
LEVEL
TPPEAK
R	ING
	15H
	DA

(2) 4-40 x 3/16" screws

Figure 2-4 — VersaTools rack mounting the TP R 15HD A

1. If feet were previously installed on the bottom of the receiver, remove them.

2. Mount the receiver on the rack shelf, using two 4-40 x 3/16" screws in opposite (diagonal) corners to secure the receiver to the shelf.

3. Install blank panel(s) (included in the 1U universal and VersaTools rack kits, optional for the 1U basic rack kit) or other unit(s) to the rack shelf.

NOnly the TP R 15HD A and products in the Extron VersaTools line can be mounted on a VersaTools shelf. Any 1U rack-mountable Extron product can be mounted on the standard shelf.

Furniture mounting

All receiver models can be mounted under furniture such as a table or podium surface using the appropriate optional mounting bracket; the Extron Under-Desk Mounting Kit for 1/8 and 1/4 Rack Width Products (part #70-212-01) (TP R 15 HD A) or Under-Desk Mounting Kit for 1/2 Rack Width Products (part

#70-077-01) (all other models).

TP Receivers • Installation and Operation 2-9