Operation
Turning on the Power and Selecting a Weight
The first time you plug the power cord into an outlet, or after there has
been an interruption in power, the display shows “ 
” At this point, you can select the weight system for the display. You can choose between pounds (LBS) or kilograms (KG). To do so,
1 Press “0” immediately after plugging in your microwave. The display will show:
If the display does not shows “Kg”, you will need to unplug the microwave and then plug it in again in order to change to the weight selection.
2 Press “0” repeatedly to select the weight system you wish to use:
Setting the Clock
1 Press the Clock button. The “ENTER” and “TIME” indicators flash.
START ENTER COOK TIME TIME2
Kg | g | Oz Lbs. QTY. |
2 Use the number buttons to enter the current time. You must press at least three numbers to set the clock. If the current time is 5:00 enter, 5,0,0.
START ENTER COOK TIME TIME2
Kg | g | Oz Lbs. QTY. |
3 When 5 seconds has elapsed, “ENTER” indicator flash and “Cloc” will be displayed.
START ENTER COOK TIME TIME2
Kg | g | Oz Lbs. QTY. |
kg g oz Lbs. cup
When you have selected the weight system you want to use, press the PAUSE/CANCEL button to end this procedure.
4 Press Clock again. A colon will blink, indicating that the time is set.
If there is a power interruption, you will need to reset the clock.
You can check the current time while cooking is in progress by pressing the Clock button.
Using the Pause/Cancel Button
The Pause/Cancel button allows you to clear instructions you have entered. It also allows you to pause the oven’s cooking cycle, so that you can check the food.
•To pause the oven during cooking: press Pause/Cancel once. To restart, press Start.
•To stop cooking, erase instructions, and return the oven display to the time of day: press Pause/Cancel twice.
•To correct a mistake you have just entered: press Pause/Cancel once, then
8