Samsung M1734NCE, M1735NCE What to Do if You are in Doubt or Have a Problem, Cooking / Reheating

Page 7

What to Do if You are in Doubt or Have a Problem

If you have any of the problems listed below try the solutions given.

This is normal.

Condensation inside the oven

Air flow around the door and outer casing

Light reflection around the door and outer casing

Steam escaping from around the door or vents

The oven does not start when you press the One Minute+ button.(M1734NCE/M1735NCE)

Is the door completely closed?

The oven does not start when you turn the TIMER knob.(M1713NCE)

Is the door completely closed?

The food is not cooked at all

Have you set the timer correctly and/or pressed the One Minute+ button?(M1734NCE/M1735NCE)

Have you set the timer correctly? (M1713NCE)

Is the door closed?

Have you overloaded the electric circuit and caused a fuse to blow or a breaker to be triggered?

The food is either overcooked or undercooked

Was the appropriate cooking length set for the type of food?

Was an appropriate power level chosen?

Sparking and cracking occur inside the oven (arcing)

Have you used a dish with metal trimmings?

Have you left a fork or other metal utensil inside the oven?

Is aluminium foil too close to the inside walls?

The oven causes interference with radios or televisions

Slight interference may be observed on televisions or radios when the oven is operating. This is normal.To solve this problem, install the oven away from televisions, radios and aerials.

If interference is detected by the oven’s microprocessor, the display may be reset. To solve this problem, disconnect the power plug and reconnect it. Reset the time. (M1734NCE/M1735NCE)

If the above guidelines do not enable you to solve the problem, contact your local dealer or SAMSUNG after-sales service.

Cooking / Reheating

The following procedure explains how to cook or reheat food.

GB

ALWAYS check your cooking settings before leaving the oven unattended.

First, place the food in the centre of the turntable and close the door.

Model: M1734NCE / M1735NCE

1.Press the Power Level button.

Result : The PL:Hi (High cooking power) indications are displayed:

Select the appropriate power level by pressing the Power Level button again until the corresponding power level is displayed. Refer to the power level table on the next page.

2.Use the Number buttons to set a cooking time. You can set a time from one second to 99 minutes, 99 seconds. To set a time over one minute, enter the seconds too.

For example, to set 20 minutes, enter 2, 0, 0, 0.

3.Press the Start button.

Result : The oven light comes on and the turntable starts rotating.

Cooking starts and when it has finished the oven beeps four times.

Never switch the microwave oven on when it is empty.

If you wish to heat a dish for a short period of time at high power (PL:Hi), simply press the One Minute+ button once for each 1 minute of cooking time. The oven starts immediately.

Model: M1713NCE

1. Set the power level to maximum by turning COOKING POWER CONTROL knob. (MAXIMUM POWER: 800 W)

2. Set the time by turning TIMER knob.

Result : The oven light comes on and the turntable starts rotating.

Never switch the microwave oven on when it is empty.

You can change the power level during cooking by turning the COOKING POWER CONTROL knob.

7

Image 7
Contents Microwave Oven Oven AccessoriesModelM1734NCE / M1735NCE ModelM1713NCE Control PanelSafety Precautions Using this Instruction BookletDo not heat Important Safety Instructions Setting the Time M1734NCE/M1735NCE Installing Your Microwave ovenCooking / Reheating What to Do if You are in Doubt or Have a ProblemOutput Power LevelsPower Level Stopping the Cooking M1713NCEUsing the Instant Cooking Feature Adjusting the Cooking Time M1713NCETurn the Cooking Power Control knob to Max Power Instant Cooking Settings Manual Defrosting Guide Manual Defrost FoodFood Fillets Defrost GuideMultistage Cooking M1734NCE/M1735NCE SeaCookware Guide Dimensions W x H x D Cleaning Your Microwave Oven Technical SpecificationsPage Electronics

M1713NCE, M1734NCE, M1735NCE specifications

The Samsung M1734NCE, M1735NCE, and M1713NCE are advanced multifunction printers designed to cater to both office and home environments, combining efficiency, versatility, and high-quality output. These models exemplify Samsung's commitment to providing reliable printing solutions that meet the demands of modern users.

The M1734NCE and M1735NCE are laser printers that stand out due to their high-speed printing capabilities, producing documents at speeds of up to 28 pages per minute. The M1713NCE, also a laser model, offers comparable speeds, ensuring that users can handle large volumes of printing without a hitch. This speed is a crucial feature for busy workplaces, allowing for greater productivity while minimizing downtime.

One of the defining characteristics of these models is their exceptional print quality. With a maximum resolution of 1200 x 1200 dpi, the prints produced are sharp and vibrant, ideal for both text-heavy documents and color graphics. This high resolution ensures that every detail is rendered accurately, meeting the quality expectations of professional users.

The M1734NCE and M1735NCE are equipped with innovative technologies that enhance usability and efficiency. They feature automatic duplex printing, which significantly reduces paper consumption and costs, making them environmentally friendly choices. Additionally, both models support mobile printing options, allowing users to print directly from smartphones or tablets via NFC, Google Cloud Print, or other mobile printing applications, thereby ensuring seamless connectivity and convenience.

Another noteworthy feature is their compact design, which makes them suitable for various office spaces, even those with limited room. The ergonomic layout does not compromise the functionality, providing ample paper handling capabilities. They come with a sizeable input tray that can accommodate a range of paper sizes, simplifying the printing of diverse documents.

Samsung has also integrated energy-efficient technologies into these models. With features like Energy Star compliance and a low power consumption mode, users can expect reduced energy costs without sacrificing performance. Moreover, their easy-to-use interfaces, highlighted by intuitive control panels, ensure that even less tech-savvy users can navigate settings with ease.

In summary, the Samsung M1734NCE, M1735NCE, and M1713NCE are powerful, multifunctional printers that excel in speed, quality, and environmental friendliness. With their advanced features and robust capabilities, they are excellent choices for any user looking to enhance productivity and achieve professional-grade outputs.