Bunn FPGA-2 DBC, FPGB-2 DBC Timer Adjustment Control Board, Approximate Amount in Ounces

Page 6

TIMER ADJUSTMENT (CONTROL BOARD)

Three different batch settings are selectable for each hopper. Each batch is independently adjustable by set- ting the length of time a slide gate opens to allow beans to drop into the grinding chamber. A second time setting for each batch determines how long the grind motor continues to run after the slide gate closes. This time is set long enough to insure that all the beans dropped into the grind chamber are ground and dispensed.

1.Determine the grind setting. (The factory setting is drip, to determine other settings, refer to the previous section.)

2.Use the table below to find approximate timer setting for the amount of coffee desired.

3.To enter the setup mode and make an adjustment, press and hold the hidden programming pad under the ®. One of the batch indicators will begin to flash off and on. At this point, release the ® button.

4.Push the hopper/batch selector button for the batch to be adjusted. Note that the digital display shows the current slide gate time setting (in seconds).

5.To increase the time, press GRIND. To decrease, press STOP.

6.To change the chamber clean-out time, press the same batch button again and note that the indicator light begins to blink more rapidly and the display shows the current clean-out time.

7.To increase the time, press GRIND To decrease it, press STOP.

8.After the cleanout time has been entered, press another batch pad and repeat steps 4 to 7. Otherwise, to exit the programming mode, press and release the ® pad and the grinder returns to the normal operating mode, using the new settings.

NOTE: While in the setup mode, if no buttons are pushed for 60 seconds, the grinder will return to normal opera- tions, retaining any settings made while in the setup mode.

Approximate Amount (in Ounces)

Timer Settings (in Seconds)

1-1/2

2.5

2

4.5

2-1/2

7.5

3

10.5

These times are for medium roast, regular grind coffee.

Roast of coffee and grinds size will vary timer setting.

6

36705

041207

 

Page 5 Page 6
Image 6
Page 5 Page 6
Contents FPG-2 DBC FPGA-2 DBC FPGB-2 DBC BUNN-O-MATIC Commercial Product Warranty Introduction User NoticesOperating Controls Electrical RequirementsCE Requirements Initial SET-UPAdjustments CleaningPreventive Maintenance Coffee GrindingTimer Adjustment Control Board Approximate Amount in Ounces

FPGB-2 DBC, FPGA-2 DBC specifications

The Bunn FPGA-2 DBC and FPGB-2 DBC are advanced digital signal processing platforms designed for high-performance applications across various industries, including telecommunications, aerospace, and data centers. These devices represent a leap forward in the capabilities of field programmable gate arrays (FPGAs) and digital signal processing (DSP) technology, providing users with enhanced flexibility, efficiency, and power.

One of the main features of the Bunn FPGA-2 DBC is its ability to accommodate a diverse range of applications. With multiple configuration options and support for various communication protocols, including Ethernet and PCIe, this device can easily be integrated into existing infrastructures. This versatility makes it ideal for industries that require rapid adaptation to changing requirements or technologies.

The FPGB-2 DBC variant complements the FPGA-2 DBC by providing additional processing power and bandwidth capabilities. This model is particularly designed for applications that demand high-speed data processing, such as real-time video encoding, signal analysis, and machine learning tasks. The combination of both models allows for scalable solutions that can grow with the evolving needs of businesses.

In terms of technologies, both the FPGA-2 DBC and the FPGB-2 DBC leverage cutting-edge semiconductor technologies to deliver reduced power consumption while maintaining impressive processing speeds. The advanced architecture allows for parallel processing, enabling the execution of multiple tasks simultaneously, which can significantly enhance overall system performance.

Among their key characteristics, these devices feature high-speed I/O interfaces that ensure efficient data transfer between the FPGA and other components. Additionally, they boast a large onboard memory capacity that aids in complex computations and stream storage, an essential aspect for applications involving large datasets.

Moreover, both models are equipped with robust development tools and software support, allowing engineers and developers to quickly prototype and deploy their designs with ease. This software interface streamlines the development process, making it accessible even for teams with limited FPGA experience.

In summary, the Bunn FPGA-2 DBC and FPGB-2 DBC stand out as exemplary solutions in the field of digital signal processing and FPGA technology. Their versatility, advanced architecture, and comprehensive support ecosystem make them valuable assets for any organization aiming to enhance its digital capabilities and responsiveness in a rapidly evolving technological landscape.
Top Page Image Contents