Bunn System III manual Warranty

Page 2

WARRANTY

Bunn-O-Matic Corp. (“Bunn”) warrants the equipment manufactured by it to be commercially free from defects in material and workmanship existing at the time of manufacture and appearing within one year from the date of installation. In addition:

1.) Bunn warrants electronic circuit and/or control boards to be commercially free from defects in material and workmanship for two years from the date of installation.

2.) Bunn warrants the compressor on refrigeration equipment to be commercially free from defects in material and workmanship for two years from the date of installation.

3.) Bunn warrants that the grinding burrs on coffee grinding equipment will grind coffee to meet original factory screen sieve analysis for three years from date of installation or for 30,000 pounds of coffee, whichever comes first.

This warranty does not apply to any equipment, component or part that was not manufactured by Bunn or that, in Bunn’s judgement, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of Bunn are not authorized to make modifications to this warranty or to make additional warranties that are binding on Bunn. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon.

The Buyer shall give Bunn prompt notice of any claim to be made under this warranty by telephone at (217)

529-6601 or by writing to Post Office Box 3227, Springfield, Illinois, 62708-3227. If requested by Bunn, the Buyer shall ship the defective equipment prepaid to an authorized Bunn service location. If Bunn determines, in its sole discretion, that the equipment does not conform to the warranty, Bunn shall repair the equipment with no charge for parts during the warranty period and no charge for labor by a Bunn Authorized Service Representative during the warranty period. If Bunn determines that repair is not feasible, Bunn shall, at its sole option, replace the equipment or refund the purchase price for the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AS SPECIFIED HEREIN, TO REPAIR OR, AT BUNN’S SOLE OPTION, REPLACEMENT OR REFUND.

In no event shall Bunn be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.

Page 2

27362

092500

 

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Bunn Warranty User Notices 20201.5600 00831.0000 00656.0000 03408.0000 03409.0000Models with electro/mechanical thermostats Models with digital brewer control assemblyElectrical Requirements Plumbing RequirementsElectro/mechanical brewers Adjusting Brew VolumesInitial SET-UP Start Switch CleaningBrew Selector Switch Operating ControlsTroubleshooting Problem Probable Cause RemedyBrew cycle will not start Troubleshooting ProblemOverflow protection switch Digital Brewer Control Assem- bly DBCTroubleshooting Problem Probable Cause Remedy Sprayhead or airvent Mechanical Triac assembly DBCWarmer element StepTimer adjustment Time adjustment ElectroDBC volume adjustment Procedures. See page 34 orTroubleshooting Problem Cannot access the DBC Digital brewer control DBC display is blank Digital brewer controlContents ServiceComponent Access Service Bypass ValveService LocationBrew Selector Switch ELECTRO/MECHANICALContactor Assembly ELECTRO/MECHANICAL only Gently remove the capillary bulb and grommet from the tankService Contactor Assembly ELECTRO/MECHANICAL only Contactor Assembly TerminalsTest Procedures Disconnect the brewer from the power source OnlyDispense Valve ElectromechanicalDigital Brewer Control Board and Display DBC TION, Entry and DescriptionService Digital Brewer Control Board and Display DBC TRIAC/HEAT Sink Assembly DBC only TRIAC/HEAT SinkP2231.30 Terminals Limit Thermostat Limit ThermostatThree wire 120/240 volt models Service ON/OFF Warmer SwitchBlack wire from the center terminal ModelsOverflow Protection Switch Test Procedure Disconnect the brewer from the power sourceService Solenoid Valve Refill Refill Solenoid ValveRefill Solenoid Terminals Start Switch Tank Heater LocationTimer ELECTRO/MECHANICAL Onlyearly Models Digital Timer ELECTRO/MECHANICAL only Late Models If voltage is as described, proceed to #7Timer Setting Digital Timer WiringWarmer Element Lower 27362 092900 Lower

System III specifications

The Bunn System III is a versatile and efficient commercial brewing system designed for high-demand environments such as cafés, restaurants, and catering operations. Renowned for its reliability and performance, the System III combines advanced brewing technology with user-friendly features to deliver exceptional coffee consistently.

One of the key features of the Bunn System III is its innovative brewing technology, which employs a unique infuser system. This design allows for optimal extraction of coffee flavors by ensuring that hot water is evenly distributed over the coffee grounds, maximizing flavor and ensuring a rich, balanced cup every time. The brewing system can brew up to 3.8 gallons of coffee per hour, making it an ideal choice for busy establishments.

The System III is equipped with an impressive built-in water heater that maintains a temperature of approximately 200°F, which is crucial for brewing coffee at the ideal temperature. This consistent temperature control minimizes the risk of under-extraction or over-extraction, resulting in better-tasting coffee. Additionally, the hot water faucet feature allows users to brew tea or instant beverages on demand, further enhancing the system's versatility.

Another characteristic that sets the Bunn System III apart is its user-friendly interface. The system is designed with intuitive controls, allowing baristas and kitchen staff to operate it with minimal training. The easy-to-read digital display provides critical information such as brew time and water temperature, ensuring that users can monitor the brewing process closely.

Durability is a hallmark of the Bunn System III. Constructed from high-quality materials, this brewing system is designed to withstand the rigors of commercial use. Its robust design ensures longevity and minimizes the need for frequent maintenance, making it a cost-effective choice for businesses.

The Bunn System III also features a large-capacity brew basket, capable of holding ample coffee grounds for high-volume brewing. This basket, combined with the system's efficient design, allows for quick and easy brewing, making it perfect for high traffic situations.

In conclusion, the Bunn System III coffee brewing system is a top choice for commercial coffee operations. Its advanced brewing technology, consistent temperature control, user-friendly features, and durable construction combine to create an exceptional brewing experience. Whether in a café, restaurant, or catering service, the Bunn System III stands out as an indispensable tool for delivering high-quality coffee efficiently.
Top Page Image Contents