Bunn IC3B service manual Electrical Requirements, Electrical Hook-Up

Page 4

ELECTRICAL REQUIREMENTS

WARNING - The brewer must be disconnected from the power source until specified in Initial Set-Up.

Refer to Data Plate on the Brewer, and local/national electrical codes to determine circuit requirements.

L2 RED

L2 RED

L2

 

 

WHITE

WHITE

N

NEUTRAL

NEUTRAL

 

L1 BLACK

L1 BLACK

L1

 

 

GREEN

GREEN

G

L2 RED

L1 BLACK

GREEN

L2 RED

L2

L1 BLACK

L1

GREEN G

120/208 and 120/240 volt ac models

Note: This electrical service consists of 3 cur- rent carrying conductors (Neutral, L1 and L2) and a separate conductor for earth ground.

Electrical Hook-Up

200 volt ac models

Note: This electrical service consists of 2 current carrying conductors (L1 and L2) and a separate conductor for earth ground.

CAUTION – Improper electrical installation will damage electronic components.

1.An electrician must provide electrical service as specified.

2.Remove the top lid and rotate the control thermostat knob fully counterclockwise to the “OFF” position and reinstall the top lid.

3.Remove the rear trunk panel, feed the cord through the strain relief at the rear of the brewer and connect it to the terminal block.

4.Using a voltmeter, check the voltage and color coding of each conductor at the power source.

5.Connect the brewer to the power source and verify the voltage at the terminal block and reinstall the rear trunk panel.

6.If plumbing is to be hooked up later be sure the brewer is disconnected from the power source. If plumbing has been hooked up, the brewer is ready for Initial Set-Up.

WARNING – The brewer must be electrically grounded using the green screw near the terminal block. Do not assume a plumbing line will provide an adequate ground.

Page 4

10792 112912

 

Image 4
Contents IC3 & IC3B BUNN-O-MATIC Commercial Product Warranty Introduction User NoticesElectrical Requirements Electrical Hook-UpPlumbing Requirements Plumbing Hook-UpInitial SET-UP Adjusting Brew Volumes CleaningOperating Controls Coffee BrewingSchematic Wiring Diagram IC3 L1 L2 N 120/208 Volts AC Or 120/240 Volts AC
Related manuals
Manual 7 pages 42.31 Kb Manual 7 pages 39.83 Kb

IC3B specifications

The Bunn IC3B is a standout commercial coffee brewer, designed to meet the demands of high-volume environments such as restaurants, coffee shops, and cafes. This machine combines efficiency, durability, and advanced technology to provide a seamless brewing experience.

One of the main features of the Bunn IC3B is its impressive brewing capacity. With the ability to brew up to 3.8 gallons of coffee per hour, this system ensures that there is always a fresh pot of coffee ready for customers. The brewer utilizes a unique heat transfer technology that heats water quickly and efficiently, ensuring optimal brewing temperatures and consistent flavor extraction.

Another notable characteristic of the IC3B is its user-friendly design. The machine features a digital display that simplifies programming and settings adjustments. Users can easily select brew strength and customize brewing times to tailor the coffee to their particular taste preferences. This level of customization is particularly important in commercial settings where customer satisfaction is paramount.

Durability is a major consideration for any commercial coffee machine, and the Bunn IC3B does not disappoint. Constructed with high-quality materials, the brewer is built to withstand the wear and tear of constant use. Its stainless steel water tank and brewing components are designed for longevity while maintaining the integrity of the coffee flavors brewed.

The Bunn IC3B is also a smart choice in terms of energy efficiency. It features an internal hot water tank that maintains the water temperature, reducing the need for excess energy during use. This not only lowers operational costs but also aligns with a growing commitment to sustainability in the commercial landscape.

Additionally, the machine includes a convenient hot water feature for making tea or other hot beverages, increasing its utility in various settings. Cleaning and maintenance are made straightforward with easily accessible components, allowing for quick disassembly and thorough cleaning, which is essential in maintaining the quality of the brewed coffee.

In summary, the Bunn IC3B stands out in the commercial coffee brewing market due to its high capacity, user-centric features, durable construction, energy efficiency, and easy maintenance. These characteristics make it a reliable choice for any establishment looking to serve quality coffee quickly and consistently.