Bunn Bunn BTX-B Brewing Perfect Coffee, See page 4 for initial set up before brewing, First time

Brewing Perfect Coffee

See page 4 for initial set up before brewing	NHBX	BTX/BX/GRX
the first time.

1. Insert BUNN coffee filter into the brew funnel.

2. Measure fresh coffee into the filter and shake gently to level the bed of grounds. (We recommend 1-2 heaping

Tbsps. of drip grind per cup of coffee).

3. Slide the brew funnel into funnel guides and open lid.

4. Pour in cold water; minimum 4 cups

(20 oz), up to maximum 10 cups (50 oz)

Do not close the lid without the funnel and decanter in place. Closing the lid releases the hot water.

5. Position decanter in place on base
under funnel of brewer. (With BTX,	UNN
pre-heat carafe with hot water)

6.Turn on the warmer. (not applicable with BTX ThermoFresh brewer)

7.Close the lid to start the flow of water into the tank.

8.When brewing has stopped, remove the brew funnel and discard the filter and grounds. Do not touch hot grounds.

	y
d o
i		u
D	?
k
now
	y
d o
i		u
D	?
k
	now

To pre-heat the thermal carafe, fill with hot water for approximately 30 seconds. Empty before brewing coffee into carafe.

BUNN filters are unique. Made with a special grade of paper for best coffee f avor, our filters are designed for strength, so the sides are taller and you don’t end up with overflow and grounds in your coffee.

5