Bunn ULTRA-2 service manual Using the Dispenser for GRANITA-TYPE Products

Page 10

USING THE DISPENSER FOR GRANITA-TYPE PRODUCTS

1.Lift the lid slightly for the selected hopper and slide back to gain access to the hopper.

2.Place the pre-mixed liquid product in the selected hopper.

3.a. Press and release the (ON/OFF) switch to power on the dispenser.

b.Press and release the appropriate (ON/OFF) switch to start the Auger Motor and to turn on AutoFill when applicable. (See *NOTE)

c.Press and release the (OFF/ICE/CHILL) switch and select ICE to begin the cooling process for the selected hopper.

4.Wait for the liquid to freeze to the desired consistency.

HINTS – Bunn-O-Matic recommends that the product in the dispenser be thawed each day, usually overnight. The ice granules get too large and a consistent product is difficult to maintain if left frozen for an extended period of time. Set the NIGHT mode for a few hours each night and return it to the DAY mode when the product has thawed sufficiently. You’ll know it is in the NIGHT mode because the display will indicate NIGHT MODE, and the hopper light(s) will turn off.

USING THE DISPENSER FOR COLD LIQUID PRODUCTS

1.Lift the lid slightly for the selected hopper and slide back to gain access to the hopper.

2.Place the pre-mixed liquid product in the selected hopper.

3.a. Press and release the (ON/OFF) switch to power on the dispenser.

b.Press and release the appropriate (ON/OFF) switch to start the Auger Motor and to turn on AutoFill when applicable. (See *NOTE)

c.Press and release the (OFF/ICE/CHILL) switch and select CHILL to begin the cooling process for the selected hopper.

4.Wait for the liquid to cool.

*NOTE: Refill system includes a “Maximum Fill Time” in the software. If the time to fill the hopper exceeds this limit, the hopper lights will flash and a “Refill Fault” will be displayed on the screen. If this accurs, check the product supply to ensure the BIB is not empty. (Change BIB if empty). Then press the “ULTRA” button for 3 seconds to clear the fault and restart the refill system.

10

45246 072611

 

Page 9 Page 11
Image 10
Page 9 Page 11
Contents ULTRA-1 ULTRA-2 Phone 217 529-6601 FAX 217BUNN-O-MATIC Commercial Product Warranty Introduction Initial setup Remove the rear plastic plug Place PAF platform assemblyAssemble the drip tray Handle Installation Instructions Internal Brixing System Setup InstructionsInternal Brixing System Brix Adjustment Instructions Run each side until water and product are flowing freelyOperating Controls ULTRA-1 Switch upper left corner of the control pad Operating Controls ULTRA-2Using the Dispenser for GRANITA-TYPE Products Using the Dispenser for Cold Liquid ProductsProgramming Switches ProgrammingProgramming the Dispenser Home ScreenLeft Programming the DispenserNight Time Mode Chill Chill Set Night Time/Set Day TimePreventive Maintenance Other Recommendations for Your DispenserRecommended Cleaning ULTRA-2 shown Assembly Following Cleaning Auto-fill Cleaning Instructions With Brixing Pump Installed Materials required00986.7000 User Notices29947.0000 ULTRA-2A
Related manuals
Manual 68 pages 12.24 Kb Manual 23 pages 57.86 Kb

ULTRA-2 specifications

The Bunn ULTRA-2 is an exceptional frozen beverage dispenser that caters to both commercial and home use, making it a popular choice in various establishments such as cafes, restaurants, and convenience stores. Renowned for its reliability and efficiency, the ULTRA-2 serves a wide range of frozen beverages, including slushes, smoothies, and frozen cocktails, providing an irresistible treat for customers.

One of the standout features of the Bunn ULTRA-2 is its high-capacity design. With a dual hopper system, this machine allows operators to serve two different flavors simultaneously. Each hopper can hold up to 3.2 gallons of product, allowing for continuous service without the need for frequent refills. This is particularly advantageous during peak hours when demand is high.

The ULTRA-2 is equipped with Bunn's advanced refrigeration technology, which ensures rapid freezing and consistent product quality. The machine uses a patented freezing mechanism that maintains optimal product texture and temperature, resulting in a smooth, uniform consistency that keeps customers coming back for more. Additionally, the ULTRA-2's adjustable temperature control allows operators to customize the consistency of the beverages to their liking.

User-friendliness is another hallmark of the Bunn ULTRA-2. The machine features intuitive controls that simplify operation, making it easy for staff to learn and use efficiently. A built-in safety feature prevents the machine from operating when the hoppers are too low, minimizing waste and ensuring product quality.

Durability and ease of maintenance are also prominent characteristics of the ULTRA-2. Constructed from high-quality stainless steel, the machine offers enhanced longevity and is resistant to rust and corrosion. The removable hoppers and door assemblies facilitate quick cleaning and maintenance, allowing businesses to keep the machine in top working condition with minimal effort.

In summary, the Bunn ULTRA-2 stands out in the crowded market of frozen beverage dispensers through its dual hopper functionality, advanced refrigeration technology, user-friendly design, and robust construction. Whether for a busy café or a family gathering, the ULTRA-2 provides a reliable solution for delivering delicious frozen beverages that satisfy a variety of tastes and preferences.
Top Page Image Contents