Bunn ULTRA-2 Initial setup, Remove the rear plastic plug Place PAF platform assembly

Page 4

Initial setup

CAUTION – The dispenser is very heavy! Use care when lifting or moving it. Use at least two people to lift or move the dispenser.

6.0”

MIN.

1.Set the dispenser on a sturdy counter top. The dispenser requires a minimum of 6.0” air clearance at the

rear of the dispenser. For optimum performance, do not let warm air from surrounding machines blow on the ULTRA dispenser.

NOTE – The dispenser should be level or slightly lower in front for proper operation.

2.Remove all shipping material, including the compressor support eyebolt, the cooling drum supports, the “Do Not Lift Here” signs from the cooling drums, and the “Rinse Before Using” signs from the hopper(s).

For models without PAF (Powder Auto-Fill), proceed to step #7.

3. Remove the rear plastic plug 4.

Place PAF platform assembly 5.

Tighten support rod from top

from the trim strip between the

on top of the motor covers and

of platform. Retighten motor

hopper drip trays and loosen the

install support rod into hole in

cover screws.

auger motor cover screws.

trim strip.

 

6. Plug RCA cord into ULTRA base

7.

Install each hopper seal over 8.

Press the seals firmly into

unit. Proceed with steps 7 thru

 

the flange at the rear of the

place.

12.

 

cooling drums as shown.

 

4

45246 072611

 

Page 3 Page 5
Image 4
Page 3 Page 5
Contents ULTRA-1 ULTRA-2 Phone 217 529-6601 FAX 217BUNN-O-MATIC Commercial Product Warranty Introduction Initial setup Remove the rear plastic plug Place PAF platform assemblyAssemble the drip tray Handle Installation Instructions Internal Brixing System Setup InstructionsInternal Brixing System Brix Adjustment Instructions Run each side until water and product are flowing freelyOperating Controls ULTRA-1 Switch upper left corner of the control pad Operating Controls ULTRA-2Using the Dispenser for GRANITA-TYPE Products Using the Dispenser for Cold Liquid ProductsProgramming Switches ProgrammingProgramming the Dispenser Home ScreenLeft Programming the DispenserNight Time Mode Chill Chill Set Night Time/Set Day TimePreventive Maintenance Other Recommendations for Your DispenserRecommended Cleaning ULTRA-2 shown Assembly Following Cleaning Auto-fill Cleaning Instructions With Brixing Pump Installed Materials requiredUser Notices 29947.000000986.7000 ULTRA-2A
Related manuals
Manual 68 pages 12.24 Kb Manual 23 pages 57.86 Kb

ULTRA-2 specifications

The Bunn ULTRA-2 is an exceptional frozen beverage dispenser that caters to both commercial and home use, making it a popular choice in various establishments such as cafes, restaurants, and convenience stores. Renowned for its reliability and efficiency, the ULTRA-2 serves a wide range of frozen beverages, including slushes, smoothies, and frozen cocktails, providing an irresistible treat for customers.

One of the standout features of the Bunn ULTRA-2 is its high-capacity design. With a dual hopper system, this machine allows operators to serve two different flavors simultaneously. Each hopper can hold up to 3.2 gallons of product, allowing for continuous service without the need for frequent refills. This is particularly advantageous during peak hours when demand is high.

The ULTRA-2 is equipped with Bunn's advanced refrigeration technology, which ensures rapid freezing and consistent product quality. The machine uses a patented freezing mechanism that maintains optimal product texture and temperature, resulting in a smooth, uniform consistency that keeps customers coming back for more. Additionally, the ULTRA-2's adjustable temperature control allows operators to customize the consistency of the beverages to their liking.

User-friendliness is another hallmark of the Bunn ULTRA-2. The machine features intuitive controls that simplify operation, making it easy for staff to learn and use efficiently. A built-in safety feature prevents the machine from operating when the hoppers are too low, minimizing waste and ensuring product quality.

Durability and ease of maintenance are also prominent characteristics of the ULTRA-2. Constructed from high-quality stainless steel, the machine offers enhanced longevity and is resistant to rust and corrosion. The removable hoppers and door assemblies facilitate quick cleaning and maintenance, allowing businesses to keep the machine in top working condition with minimal effort.

In summary, the Bunn ULTRA-2 stands out in the crowded market of frozen beverage dispensers through its dual hopper functionality, advanced refrigeration technology, user-friendly design, and robust construction. Whether for a busy café or a family gathering, the ULTRA-2 provides a reliable solution for delivering delicious frozen beverages that satisfy a variety of tastes and preferences.
Top Page Image Contents