Bunn H5EA PC Initial SET-UP, Draining the Dispenser, Cleaning, Wall Mounted Installation

Page 6

INITIAL SET-UP

CAUTION - The dispenser must be disconnected from the power source throughout the initial set-up, except when specified in the instructions.

1.Remove the upper panel from the rear of the dispenser.

2.Make sure the toggle switch below the circuit board is set to the desired voltage (120 volts or 208/240 volts) and the red switch on the circuit board is in the "SET" position.

3.Connect the dispenser to the power source and turn-on the water supply.

4.Place the master switch in the "ON" position.

5.Water will automatically flow into the tank to the proper level and shut-off. This will take approximately 7 minutes.

6.The water will heat to the factory default setting of 200° F (93° C) for most dispensers, and 90° F (32° C) for other dispensers.

7.Refer to PROGRAMMING to set the tank temperature, ready temperature, and dispense volumes.

DRAINING THE DISPENSER

CAUTION - The dispenser must be disconnected from the power source throughout these steps.

1.Disconnect the dispenser from the power source.

2.Shut-off and disconnect the incoming water supply

3.Remove the 4-40 screws at the sides of the top panel.

4.Gently remove one of the grommets from the tank lid.

5.Insert a syphon tube to the bottom of the tank and syphon ALL of the water out.

CLEANING

The use of a damp cloth rinsed in any mild, non-abrasive, liquid detergent is recommended for cleaning all surfaces on Bunn-O-Matic equipment.

WALL MOUNTED INSTALLATION

If the dispenser is wall mounted, the bottom of the dispenser should be at the same height as a counter or table top. Use B.O.M. part #12542.0000 for side mounted Wall Bracket Kit or # 13125.0001 for front mounted Wall Bracket Kit .

SUPPORT FOR LARGE RECEPTACLES

CAUTION: If the dispenser is to be used with larger receptacles such as pitchers or pots, those receptacles must be adequately supported during dispensing of hot water to avoid spillage of very hot water. This support may be provided by a table or counter top, or use B.O.M. part #12599.0000 Shelf Kit.

6

39338 012609

 

Image 6
Contents H5E-DV PC H5EA PC BUNN-O-MATIC Commercial Product Warranty Introduction User NoticesElectrical Requirements 120/208 & 120/240V acCE Requirements Plumbing RequirementsPlumbing Hook UP Initial SET-UP CleaningWall Mounted Installation Draining the DispenserVolume Selector Buttons Operating ControlsLevel 2 Programming Tank Water Temperature & Ready Temperature SET-UPProgramming CenterAdjusting Dispense Volumes Restoring Factory DefaultsSchematic Wiring Diagram H5E-DV PCWiring Diagrams Schematic Wiring Diagram H5EA PC CE

H5EA PC specifications

The Bunn H5EA PC is a coffee brewer that expertly combines advanced technology with user-friendly features, making it an ideal choice for coffee enthusiasts and commercial settings alike. Known for its reliability and efficiency, this brewer is designed to deliver exceptional taste and quality, ensuring that coffee is served at its best.

At the heart of the Bunn H5EA PC is its precision brewing technology. The machine is equipped with a powerful heating element that optimizes the water temperature for brewing, ensuring that every cup of coffee reaches the ideal extraction level. This technology significantly reduces brewing time while maintaining consistent results, allowing users to serve coffee quickly without sacrificing flavor.

One of the standout features of the H5EA PC is its large capacity. With the ability to brew up to 12 cups of coffee in just a single cycle, it is perfect for both home use and commercial environments like cafes and restaurants. The machine’s generous water reservoir minimizes the need for frequent refilling, enhancing convenience during busy hours.

The Bunn H5EA PC also incorporates a unique digital display that provides users with real-time feedback and customizable brewing settings. This touch-screen interface allows users to adjust brewing strength and temperature to cater to personal preferences or specific coffee types. This level of customization ensures that users can create the perfect cup every time.

Another notable characteristic is the brewer's durable construction. Made from high-quality materials, the H5EA PC is designed to withstand heavy use while maintaining its performance. Its sleek and professional design makes it an attractive addition to any kitchen or commercial space.

The Bunn H5EA PC features a built-in water filter that enhances the quality of the water used for brewing. This filtration system removes impurities and ensures a clean taste, ultimately resulting in a superior coffee experience.

Overall, the Bunn H5EA PC stands out for its innovative technology, user-friendly design, and impressive brewing capacity. Whether for home use or a bustling cafe, this coffee brewer promises an exceptional coffee experience that satisfies even the most discerning coffee lovers. With its combination of advanced features and reliability, the H5EA PC represents a solid investment for anyone looking to elevate their coffee game.