Projector mounting

Installation and Operation, cont’d

1.	Loosely attach the mounting brackets to the transmitter
	or receiver using the four machine screws and washers
	supplied with the mounting kit.
2.	Hold the transmitter or receiver against the inside of the
	surface through which it will be mounted. Mark the four
	screw holes on the inside of the surface to which you are
	mounting the device.
3.	Drill four pilot holes, each 3/32" in diameter by 1/4" deep,
	where you made marks.
4.	Using the provided four wood screws, secure the brackets
	to the mounting surface.
5.	Slide the transmitter or receiver up and down in the
	mounting brackets until the face of the transmitter or
	receiver is at the desired height. Tighten the screws that
	secure the brackets in place.

If the screws are inaccessible to a screwdriver:

a. Mark the location of the brackets relative to the screws.

b. Remove the transmitter or receiver from inside the furniture.

c. Tighten the screws.

d. Replace the unit inside the surface (step 4).

The receiver can be mounted on a projector bracket using either of the following optional Extron projector mounting kits:

•PMK 300 projector mounting kit (part #70-374-01)

•PMK 350 low profile projector mounting kit

(part #70-563-02[black] or part #70-563-03[white])

PMK 300 mounting

Mount the receiver to a PMK 300 bracket as follows:

1.	If necessary, remove the feet from the bottom of the
	receiver.
2.	Mount the receiver to one of the bracket’s three mounting
	plates using two of the supplied 4-40 x 3/16" screws in
	opposite (diagonal) corners to secure the device to the
	bracket. It can be vertically mounted facing either up or
	down (figure 2-5).

NOn the side mounting plates, the device is typically mounted on the outside of the bracket.

On the front mounting plate, the device is typically mounted on the inside of the bracket.

Side Mounting

Plate

Bracket

Brace

U-Bolt

Extron

DVI 201 or HDMI 201

Receiver

Power Supply

Extron

PMK 300

Multi-product Projector Mount Kit

Front Mounting

Plate

Figure 2-5 — PMK 300 projector mounting a receiver

3. If the power supply is connected to the receiver, use the two included tie wraps to strap the power supply to one of the brackets.

2-6

HDMI 201 Tx/Rx • Installation and Operation

2-7

HDMI 201 Tx/Rx specifications

Extron Electronics has consistently been at the forefront of providing high-quality professional AV solutions, and their HDMI 201 Tx/Rx model stands as a testament to this legacy. Designed for superior performance in distributing HDMI signals, the HDMI 201 Tx/Rx offers a reliable solution for any professional installation environment, such as classrooms, conference rooms, and commercial spaces.

One of the standout features of the HDMI 201 Tx/Rx is its ability to extend HDMI signals beyond typical limitations. With support for high-definition video up to 1080p and audio formats, it ensures that users experience pristine image quality without degradation. This model can extend signals up to 200 feet (60 meters) over a standard category cable, allowing for flexible installations without compromising quality.

The HDMI 201 Tx/Rx utilizes advanced technologies including Extron's unique engineering that incorporates built-in EDID management. This feature simplifies configuration by allowing the transmission of data between display devices and source components, ensuring compatibility and optimal performance. Additionally, the device supports a wide range of video resolutions and audio formats, making it adaptable for various applications and user needs.

Another remarkable characteristic is the HDMI 201's compact and robust design. The unit is housed in a sturdy enclosure, making it suitable for rack mounting or placement in tight spaces without sacrificing performance. Furthermore, the Transmitter and Receiver are powered via a single power supply, facilitating easier installation and reducing clutter.

The Extron HDMI 201 Tx/Rx also features a user-friendly interface, with LED indicators that provide clear status information at a glance. This allows AV managers and technicians to quickly troubleshoot connection issues and monitor the system's performance, enhancing reliability and ease of use.

In conclusion, the Extron HDMI 201 Tx/Rx is a powerful solution for the transmission and extension of HDMI signals in professional settings. With its exceptional video and audio support, advanced features like EDID management, compact design, and user-centric interface, it represents a commitment to quality and innovation in the realm of audio-visual technology. This makes the HDMI 201 Tx/Rx an ideal choice for any AV professional seeking to enhance their installations and deliver superb content quality.