Introduction, cont’d, Features | Extron electronic HDMI 201 Tx/Rx

Introduction, cont’d

NIn this manual, the terms "HDMI 201,"

"HDMI 201 Tx," "HDMI 201 Rx," "transmitter," and "receiver" refer to the applicable unit(s) in either form factor, unless otherwise specified.

TP cable advantages

Twisted pair cable is much smaller, lighter, more flexible, and less expensive than coaxial or HDMI cable. These transmitter and receiver twisted pair (TP) products make cable runs simpler and less cumbersome. Termination of the cable with RJ-45 connectors is simple, quick, and economical.

NThe transmitter and receiver pair works with unshielded twisted pair (UTP) or shielded twisted pair (STP) cables; but, to ensure FCC Class A and CE compliance, STP cables are recommended.

NDo not use Extron’s UTP23SF-4 Enhanced Skew- Free™ A/V UTP cable to link the transmitter and receiver. Skew-free A/V cable was designed for most Extron TP transmitter/receiver applications, but the HDMI 201 Tx/Rx does not work properly with this cable.

Control communications

The RS-232 and/or infrared (IR) communications are via a passive pass-through only; the transmitter and receiver do not generate or respond to these signals.

Transmission distance

The maximum transmission distance is determined by the resolution of the signal and the TP cable that is used.

With CAT 5/5e/6 UTP cable, the Tx/Rx pair can transmit and receive 720p and 1080i HDTV or XGA video signals up to 200' (60 m) and 1080p HDTV or UXGA video up to 100' (30 m).

With CAT 5/5e/6 STP cable, the Tx/Rx pair can transmit and receive 720p and 1080i HDTV or XGA video signals up to 200' (60 m) and 1080p HDTV or UXGA video up to 125' (38 m).

NThe transmission distance varies greatly, depending on the signal resolution, type of cable used, graphics card, and display used in the system.

Features

Transmits single link HDMI signals over two CAT 5/5e/6 cables — Standard twisted pair cables provide an economical, easily installed cable solution.

Long distance transmission —

CAT 5/5e/6 UTP cable — Accommodates 720p and 1080i HDTV or XGA video over 200' (60 m), and

1080p HDTV or UXGA (1600 x 1200) over 100' (30 m).

CAT 5/5e/6 STP cable — Accommodates 720p and 1080i HDTV or XGA video over 200' (60 m), and

1080p HDTV or UXGA (1600 x 1200) over 125' (38 m).

Supports DDC and HDCP copy protection transmission — The Tx/Rx pairs fully support long distance transmission of the DDC and HDCP signals.

Remote powering of transmitter or receiver — Only one power supply is necessary to power both devices.

Control communications pass-through — Bidirectional RS-232 or IR control signals can be transmitted alongside the HDMI signal, so that the remote display can be controlled without the need for additional cabling.

Audio routing — The HDMI 201 A D Tx/Rx also routes unbalanced stereo audio when both units are the Decora form factor.

Supports CEC signal transmission

1" high, quarter rack width, metal enclosures (HDMI 201 Tx and HDMI 201 Rx [non-Decora] only) — With low profile enclosures, both transmitter models and both receiver models can be discreetly installed in locations such as behind a plasma or LCD flat-panel display.

Wall-mountable enclosures (HDMI 201 A D Tx and HDMI 201 A D Rx [Decora] only)

External 100 VAC to 240 VAC, 50/60 Hz, international power supply (part #70-055-01) — Included with units sold as a paired system and with transmitters

1-4

HDMI 201 Tx/Rx • Introduction

1-5

HDMI 201 Tx/Rx specifications

Extron Electronics has consistently been at the forefront of providing high-quality professional AV solutions, and their HDMI 201 Tx/Rx model stands as a testament to this legacy. Designed for superior performance in distributing HDMI signals, the HDMI 201 Tx/Rx offers a reliable solution for any professional installation environment, such as classrooms, conference rooms, and commercial spaces.

One of the standout features of the HDMI 201 Tx/Rx is its ability to extend HDMI signals beyond typical limitations. With support for high-definition video up to 1080p and audio formats, it ensures that users experience pristine image quality without degradation. This model can extend signals up to 200 feet (60 meters) over a standard category cable, allowing for flexible installations without compromising quality.

The HDMI 201 Tx/Rx utilizes advanced technologies including Extron's unique engineering that incorporates built-in EDID management. This feature simplifies configuration by allowing the transmission of data between display devices and source components, ensuring compatibility and optimal performance. Additionally, the device supports a wide range of video resolutions and audio formats, making it adaptable for various applications and user needs.

Another remarkable characteristic is the HDMI 201's compact and robust design. The unit is housed in a sturdy enclosure, making it suitable for rack mounting or placement in tight spaces without sacrificing performance. Furthermore, the Transmitter and Receiver are powered via a single power supply, facilitating easier installation and reducing clutter.

The Extron HDMI 201 Tx/Rx also features a user-friendly interface, with LED indicators that provide clear status information at a glance. This allows AV managers and technicians to quickly troubleshoot connection issues and monitor the system's performance, enhancing reliability and ease of use.

In conclusion, the Extron HDMI 201 Tx/Rx is a powerful solution for the transmission and extension of HDMI signals in professional settings. With its exceptional video and audio support, advanced features like EDID management, compact design, and user-centric interface, it represents a commitment to quality and innovation in the realm of audio-visual technology. This makes the HDMI 201 Tx/Rx an ideal choice for any AV professional seeking to enhance their installations and deliver superb content quality.