Bunn Dual SH manual User Notices, #05876.0000

Page 3

USER NOTICES

Carefully read and follow all notices on the grinder and in this manual. They were written for your protection. All notices on the grinder are to be kept in good condition. Replace any unreadable or damaged labels.

WARNING

Use only on a properly protected circuit capable of the rated load.

Electrically ground the chassis. Follow national/local electrical codes. Do not use near combustibles.

An extension cord, when used, must be shorter than 20 feet if 16-gage 3-conductor wire, or shorter than 10 feet if 18-gage 3-conductor wire.

FAILURE TO COMPLY RISKS EQUIPMENT

DAMAGE, FIRE, OR SHOCK HAZARD

READ THE ENTIRE OPERATING MANUAL INCLUDING THE LIMIT OF WARRANTY AND LIABILITY BEFORE BUYING OR USING THIS PRODUCT

20545-0000D 01/04 © 1990 Bunn-O-Matic Corporation

#20545.0000

PERSONAL INJURY

HAZARD.

KEEP FINGERS AND FOREIGN OBJECTS OUT OF HOPPER OR CHUTE OPENING.

#05876.0000

To reduce the risk of electric shock, do not remove or open cover.

No user-serviceable parts inside. Authorized service personnel only. Disconnect power before servicing.

#37881.0000

ELECTRICAL REQUIREMENTS

Refer to Data Plate on the Grinder, and local/national electrical codes to determine circuit requirements. This grinder has an attached cordset and requires 2-wire, grounded service rated:

120 volts ac, 15 amp, single phase, 60 Hz, for domestic grinders.

230 volts ac, 10 amp, single phase, 50 Hz, for most international grinders. 100 volts ac, 15 amp, single phase, for some international grinders.

OPERATING CONTROLS

Grind Pad (a)

Pressing initiates a timed grind cycle.

Stop Pad (b)

Pressing ends the operation of the grinder.

® PAD (c)

Pressing the ¨ pad allows programming access (see page 6).

d

a

c

d

b

Hopper/Batch Selector Pads (d)

These pads are located on the funnel depictions on each side of the grinder with a total of 6 pads. Selecting one of these pads will select the amount of grind and side from which to grind.

Example: Selecting the lower pad on the left side will grind enough beans from the left hopper of the grinder to brew the amount programmed into grinder.

Control Board

The control board determines the amount of beans that will leave the hopper in a grind cycle. The timer portion can be adjusted to dispense a different amount from each hopper and each batch size. The scale is from 0.4 to 99.9 seconds. Refer to the Adjustments section for timer setting chart (page 7).

36529 080706

Page 2 Page 4
Image 3
Page 2 Page 4
Contents MHG Introduction #05876.0000 User NoticesCleaning Initial SET-UP & ProgrammingCoffee Grinding Burr Adjustment AdjustmentsTo Write a Name To a Hopper Communicating with Coffee BrewerApproximate Timer Settings in SECONDS+ Name HOPPER? No YES Review RECIPES? Name HOPPER? Coffee Chart Card Contains Recipe for Coffee Name Schematic Wiring Diagram MHG

Dual SH specifications

The Bunn Dual SH coffee maker is a highly regarded appliance in the world of commercial coffee brewing, designed for establishments that demand quality and efficiency. This model brings together innovative technology, ease of use, and the capability to deliver exceptional coffee consistently.

One of the standout features of the Bunn Dual SH is its dual brewing capability, allowing users to brew two different coffee types simultaneously. This is an invaluable asset for busy environments like cafes, restaurants, and offices, enabling rapid service and variety in beverage offerings. Each brewing chamber operates independently, providing flexibility in the choice of coffee roast, strength, or flavor profile without compromising on the brewing process itself.

The Bunn Dual SH utilizes advanced brewing technology, including its proprietary SmartWatt system. This feature ensures optimal brewing temperatures and consistency across different batches, resulting in a reliably delicious cup of coffee every time. The brewing mechanism is also designed to accommodate varying grind sizes and coffee types, making it versatile for different coffee blends.

With a sleek and compact design, the Bunn Dual SH fits seamlessly into any workspace without occupying excessive counter space. The stainless steel construction not only enhances its aesthetic appeal but also contributes to durability and longevity, ideal for high-traffic environments.

Moreover, the Bunn Dual SH is user-friendly, featuring intuitive controls that allow baristas and staff to operate the machine with ease. The digital display provides real-time information on brew cycles, ensuring that operators are always informed about the brewing process.

Additionally, maintenance and cleaning are straightforward, with removable components designed for ease and efficiency. This simple maintenance routine helps to keep the coffee maker in optimal condition, providing not only longevity but also great tasting coffee day in and day out.

In summary, the Bunn Dual SH coffee maker is a premier choice for those looking for a reliable, efficient, and high-quality brewing solution. Its dual brew capability, advanced technology, durable construction, and user-centric design make it an outstanding addition to any coffee-focused establishment. Whether brewing for a morning rush or a relaxed afternoon crowd, the Bunn Dual SH proves to be a steadfast partner in delivering exceptional coffee experiences.
Top Page Image Contents