specifications
Video
Gain ............................................... Unity
Video input
Number/signal type | 1 set of proprietary analog signals |
Connectors | 1 female |
Video output
Number/signal type | 1 | RGBHV, RGBS, component video |
| and | |
| (follows input type) | |
Connectors |
|
|
MTP U R RSA SEQ | 1 female | |
| 3 | BNC female for Y, |
| (1) | |
| 1 | BNC female for composite video |
All other models | 1 female | |
| (1) | |
| 1 | BNC female for composite video |
Nominal level | 1 | |
| ||
| 0.7 | |
| component video | |
| 0.3 | |
Minimum/maximum levels | 0.8 V to 1.2 | |
Impedance | 75 ohms (during video output only) | |
Return loss | ||
DC offset | <±20 mV with input at 0 offset | |
Sync
Output type | RGBHV, RGBS |
Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM |
Output level | 4.0 V to 5.0 |
Output impedance | 87 ohms (24 mA) |
Polarity | Positive or negative (selectable) |
Audio – MTP U R RSA SEQ, MTP U R A
Gain | Unbalanced output: 0 dB; |
| balanced output: +6 dB |
Frequency response | 20 Hz to 20 kHz, ±1 dB (for DC coupling, |
| with jumpers 4 and 5 installed) |
THD + Noise | 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal |
| level |
S/N | >70 dB at maximum output (unweighted) |
Audio input – MTP U R RSA SEQ, MTP U R A See MTP Series transmitters’ audio output specifications
Number/signal type | 1 set of proprietary analog signals |
Connectors | 1 female |
NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output – MTP U R RSA SEQ, MTP U R A
Number/signal type | 2 mono, balanced/unbalanced |
Connectors | (1) 3.5 mm captive screw connector, 5 pole |
Impedance | 50 ohms unbalanced, 100 ohms balanced |
Gain error | ±1 dB channel to channel |
Control/remote – external device
(MTP U R RSA SEQ, MTP U R RS SEQ or MTP U R RS)
Serial control port input/output | |
| screw connector |
NOTE: The serial communications link of an MTP U R RSA SEQ,
MTP U R RS SEQ or MTP U R RS is unidirectional only, transmitter to receiver, unless the receiver’s internal switch has been set.
Baud rates | Up to 38400 bps at up to 500' (152 m) |
| (Higher data rates and distances are |
| possible. Performance will vary based on |
| baud rate and cable length.) |
Protocol | Data bits = 5 - 8 |
| Stop bits = 1 or 2 |
| Parity = odd, even, none |
| Flow control = XON, XOFF, none |
NOTE: Protocol is mirrored between the transmitter and the receiver. | |
Serial control pin configurations | Captive screw connectors: 1 = TX, 2 = RX, |
| 3 = GND |
|
|
General |
|
External power supply | 100 VAC to 240 VAC, 50/60 Hz, external, |
| universal; to 12 VDC, 2 A, regulated |
Power input requirements | 12 VDC, 0.5 A |
Temperature/humidity | Storage: |
| 10% to 90%, noncondensing |
| Operating: +32 to +122 °F (0 to +50 °C) / |
| 10% to 90%, noncondensing |
Cooling | Convection, unvented |
Rack mount | Yes, with optional 1U rack shelf, part |
| |
| rack shelf, part |
| Also furniture mountable with optional Mini |
| |
| or projector mountable with optional |
| projector mounting kit, part |
Enclosure type | Metal |
Enclosure dimensions | 1.7" H x 4.3" W x 3.0" D (1U high, quarter |
| rack wide) |
| 4.3 cm H x 10.9 cm W x 7.6 cm D |
| (Depth excludes connectors.) |
Product weight | 0.6 lbs (0.3 kg) |
Shipping weight | 2 lbs (1 kg) |
Vibration | ISTA 1A in carton (International Safe Transit |
| Association) |
Listings | UL, CUL |
Compliances | CE, FCC Class A, VCCI, AS/NZS, ICES |
MTBF | 30,000 hours |
Warranty | 3 years parts and labor |
NOTE: All nominal levels are at ±10%. |
| |
Model | Version Description | Part Number |
MTP U R RSA SEQ | A/V & | |
MTP U R RS SEQ | Video & | |
MTP U R A | Video & Audio Universal Receiver | |
MTP U R RS | Video + | |
Specifications are subject to change without notice.