Shindaiwa 62891-94311 manual Technical Specifications, Product Description

Product Description

Guide Bar and

Chain

Upper Tube

Coupler

Air Filter Assembly	Top Engine Cover
	Screw
	Spark Plug

Recoil Starter

Fuel Tank Powerhead Assembly

Handle

Grip

Gearcase	Oil Filler Cap
	Guide Bar and
	Chain

	Cutting Head
Bar Oil Reservoir	Assembly

Ignition Switch

Lower Tube

Throttle Trigger

Technical Specifications

Dry Weight	6.1 kg/13.4 lb.
Length w/10" bar assembly	2804 mm/110.4 in.
Engine Type	2-cycle, air-cooled, vertical-cylinder
Bore x Stroke	32 x 28 mm/1.3 x 1.1 in.
Displacement	22.5 cc/1.4 cu. in.
Maximum Output	0.8kW/1.1 hp @ 7500 min-1 (rpm)
Fuel/oil ratio	50:1
Fuel Tank Capacity	670 ml/22.7 oz.
Carburetor Type	Walbro WYL-122
Ignition	One-piece, electronic, transistor-controlled
Spark Plug	NGK BMR6A
Air Filter	Non-reversible flocked filter element
Muffler Type	2-Stage Catalyst
Starting Method	Recoil
Cooling System	Forced air
Stopping Method	Slide switch
Transmission Type	Automatic, centrifugal clutch with bevel gear
Chain Guide Bar	3/8" pitch, .043" gauge, 10-inch Micro Lite™
Chain Type	3/8" pitch Micro Lite™, .043" gauge
Sprockets	3/8-inch, fixed spur
Gearcase Ratio	1.06 : 1
Chain Speed	23.5 m (77 ft.)/sec.@ 10,000 min-1 (rpm)
Chain Lubrication	Automatic adjustable oiler
Chain Lubricant	Shindaiwa Premium Bar and Chain Oil
Optional Equipment	Shoulder strap, loop handle
Optional Bars	8-inch or 12-inch
EPA Emission Compliance Period*	Category A

* The EPA emission compliance referred to on the emission compliance label located on the engine, indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements. Category C = 50 hours (Moderate), B = 125 hours (Intermediate) and A = 300 hours (Extended).