Assembly

Prior to assembly

 

 

Using Figure above as a guide, familiar-

■ Powerhead Assembly

ize yourself with the Shindaiwa P231

■ Lower Tube Assembly

pole pruner and its various components.

■ Upper Tube/Saw Assembly, Chain and

Understanding your unit helps ensure

top performance, longer service life, and

Guide Bar

■ Chain CoverTool Kit Containing:

safer operation.

 

•

Spark Plug Wrench

Before assembling, make sure you have

•

4mm Hex Wrench

all the components required for a com-

•

8 x 10mm Spanner

plete unit:

Carefully inspect all components for damage.

 

IMPORTANT!

The terms “left”, “left-hand”, and “LH”; “right”, “right-hand”, and “RH”; “front” and “rear” refer to directions as viewed by the operator during normal operation.

WARNING!

Do not make unauthorized modifications or alterations to your pruner or its components.

Powerhead Installation

1.Place the powerhead on a clean, flat surface, spark plug facing up.

2.Use the 4mm hex wrench to loosen the tube clamp screw. Verify that the D-shaped shim washer is positioned as shown below.

Tube Clamp

Hex

Wrench

3.Add some moly-type EP grease to splines at the end of the main shaft.

CAUTION!

Do not force the shaft tube into the powerhead! Excessive force can damage the shaft tube and mainshaft.

4.Slide the outer tube into the tube clamp until the tube bottoms. If installation is difficult, rotate the outer tube or main shaft slightly until you feel the mainshaft splines engage with the powerhead. Outer tube needs to be inserted so that the end of the grip hits joint cap.

5.Position the outer tube so that the igni- tion switch is facing up and the throttle lever is facing down.

Bar and Chain Options

8 inch Bar — 90SG-33E Chain

10 inch Bar — 90SG-39E Chain

12 inch Bar — 90SG-44E Chain

6.Slide the outer tube into the powerhead until the throttle grip just contacts the tube clamp.

7.Tighten the clamp screw firmly.

 

 

Main

Tube

 

 

Clamp

 

Outer

Shaft

 

 

Tube

 

 

Ignition

Grip

 

 

Switch

 

 

 

 

 

 

Clamp Screw

 

Throttle Lever

Connecting the Throttle Cable

Remove The Cylinder Cover

1.Remove the spark plug boot.

2.Remove the two lower cylinder cover screws.

3.Loosen the top cylinder cover screw until the cover is free of the engine. (The top cylinder cover screw is captive). Lift the cylinder cover off of the engine.

Top Cylinder

Cover Screw

Hex Wrench

Spark Plug

Boot

Lower Cylinder

Cover Screws

Page 6 Page 8
Page 7
Image 7
Shindaiwa 62891-94311 manual Assembly, Prior to assembly, Powerhead Installation, Bar and Chain Options
Page 6 Page 8

62891-94311 specifications

The Shindaiwa 62891-94311 is a premium combination of engineering and technology, designed for lawn care and landscaping professionals. This tool provides efficient and reliable performance, making it a top choice for outdoor enthusiasts and contractors alike. One of the standout features of the Shindaiwa 62891-94311 is its lightweight yet durable construction. This ensures that it delivers high performance without sacrificing user comfort, allowing operators to work for extended periods without undue fatigue.

This model is equipped with advanced engine technology that enhances fuel efficiency and reduces emissions. The 2-stroke engine not only delivers impressive power but also adheres to stringent environmental regulations. Users appreciate the reduced environmental footprint, which aligns with a growing trend towards sustainability in landscaping equipment.

Another key characteristic of the Shindaiwa 62891-94311 is its ergonomic design. The handle is designed for optimum comfort and control, reducing vibration during use, which leads to greater precision and reduces the risk of strain injuries. The combination of the lightweight structure and ergonomic grip allows for longer operational hours, ensuring that users can tackle large projects efficiently.

The product features easy-start technology, enabling quick and effortless ignition. This is particularly beneficial for professionals who need to maximize productivity on job sites. Additionally, the model includes an adjustable throttle, allowing users to easily adapt the power output according to their specific needs, whether it’s for trimming, edging, or heavy-duty cutting tasks.

Durability is another focus for the Shindaiwa 62891-94311. The materials used in its construction are engineered to withstand the rigors of outdoor use, ensuring longevity and reliability. This means that users can invest in this tool with confidence, knowing it can handle extensive workloads and still perform optimally.

In conclusion, the Shindaiwa 62891-94311 is a versatile and powerful tool that incorporates advanced technology, ergonomic design, and durability. It is an ideal choice for landscaping professionals seeking a reliable, efficient, and eco-friendly solution for their outdoor tasks. Whether trimming hedges or tackling tough underbrush, this model stands out as a preferred option in the field of outdoor power equipment.
Top Page Image Contents