Bunn 34025.0004A manual Main ON/OFF, User Notices

Page 3

USER NOTICES

The notices on this brewer should be kept in good condition. Replace unreadable or damaged labels.

WARNING

• DO NOT OVERLOAD CIRCUIT.

• ALWAYS ELECTRICALLY GROUND THE CHASSIS.

• DO NOT DEFORM PLUG OR CORD.

• FOLLOW NATIONAL AND LOCAL ELECTRICAL CODES.

• KEEP COMBUSTIBLES AWAY.

FAILURE TO COMPLY RISKS EQUIPMENT

DAMAGE, FIRE OR SHOCK HAZARD.

READ THE ENTIRE

OPERATING MANUAL BEFORE

USING THIS PRODUCT

00986.0000F 10/07 ©1994 Bunn-O-Matic Corporation

00986.0000

00658.0000

03408.0004

37881.0000

MAIN ON/OFF

00824.0002SWITCH

03409.0004

As directed in the International Plumbing Code of the International Code Council and the Food Code Manual of the Food and Drug Administration (FDA), this equipment must be installed with adequate backflow prevention to comply with federal, state and local codes. For models installed outside the U.S.A., you must comply with the applicable Plumb- ing /Sanitation Code for your area.

00824.0001

39803.0000

00656.0001

20201.5600

Page 3

34025.4 031312

 

Image 3
Contents Single SH DBC Introduction BUNN-O-MATIC Commercial Product WarrantyUser Notices Main ON/OFFElectrical Requirements Electrical HOOK-UP Models without power cordCE Requirements Plumbing RequirementsPlumbing HOOK-UP Operating Controls Procedure to set brew temperature Initial SetupTemperature Selection Ready to BREW...WATER Temp XXX˚ when tank is atProcedure to set ready temperature Coffee BrewingSET Ready Range 185˚F 85˚C to 203˚F 95˚C Cleaning