Electrical Requirements, CE Requirements

ELECTRICAL REQUIREMENTS

WARNING -

The brewer must be disconnected from the power source until speciﬁed in Initial Set-Up.

Refer to Data Plate on the Brewer, and local/national electrical codes to determine circuit requirements.

ELECTRICAL HOOK-UP (All Models)

CAUTION – Improper electrical installation will damage electronic components.

1.An electrician must provide electrical service.

2.Determine the available on-site electrical service.

3.Select the desired unit voltage based on the available on-site electrical service.

4.Using a voltmeter, check the voltage and color coding of each conductor at the electrical source.

5.Remove the front access panel beneath the sprayhead to gain access to the terminal block.

6.Feed the supply leads through the rear of the brewer.

7.Using the above diagrams, connect the desired electrical service to the ﬁeld wiring terminal block.

8.If wiring the machine for operation on 120/208 or 120/240 volts with a Power Supply Cord, the Power Supply Cord must be UL Listed Flexible Cord Type SO, SJO, SJTO, HSJO or SJOW, No. 12 AWG, 4 Con- ductor, Rated 90° C. Attachment Plug Cap must be UL Listed, NEMA 14-20P or L14-20P Conﬁguration, Rated 125/250V, 20 AMPS. The Power Supply Cord must be at least 3 feet long and maximum 6 feet long (measured from Strain Relief to end of the Attachment Plug Cap).

9.Before proceeding, verify the voltage at the ﬁeld wiring terminal block.

10.Set voltage switch to the appropriate position and replace the access panel. (DV Models Only)

11.If plumbing is to be hooked up later be sure the brewer is disconnected from the power source. If plumbing has been hooked up, the brewer is ready for Initial Set-Up.

CE REQUIREMENTS

•This appliance must be installed in locations where it can be overseen by trained personnel.

•For proper operation, this appliance must be installed where the temperature is between 5°C to 35°C.

•Appliance shall not be tilted more than 10° for safe operation.

•An electrician must provide electrical service as speciﬁed in conformance with all local and national codes.

•This appliance must not be cleaned by water jet.

•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given instructions concerning use of this appliance by a person responsible for its safety.

•Children should be supervised to ensure they do not play with the appliance.

•If the power cord is ever damaged, it must be replaced by the manufacturer or authorized service personnel with a special cord available from the manufacturer or its authorized service personnel in order to avoid a hazard.

•Machine must not be immersed for cleaning.

Note: This electrical service requires 3 current carrying conductors (Neutral, L1 and L2) and a separate conductor for earth ground.

Twins

All Twins are 120/208 & 120/240V AC

Single phase unless otherwise noted.

Note: Power cord must be connected to center terminal block on all Twins unless otherwise noted.

Page 4	39130 120809

39130.0000J specifications

The Bunn 39130.0000J is a prominent model in the world of commercial coffee brewing, known for its innovative features and reliable performance. This coffee maker is designed specifically for high-demand environments such as cafes, restaurants, and offices, where efficiency and quality are paramount.

One of the key features of the Bunn 39130.0000J is its ability to brew large volumes of coffee quickly. The machine can produce up to 3.8 gallons of coffee per hour, making it ideal for busy settings where time is of the essence. With a simple on/off control, operators can easily manage brews throughout the day without the need for complicated programming.

The brewing process benefits from Bunn's proprietary brewing technology, which ensures optimal extraction and flavor. The machine utilizes a patented brewing system that maintains consistent water temperature during the brewing cycle, delivering a superior cup of coffee every time. This system is designed to enhance the rich flavors and aromas, providing a quality experience for customers.

Additionally, the Bunn 39130.0000J features a large, stainless steel water tank. This tank holds a significant amount of water, allowing for a quick heat-up time and enabling the machine to continuously brew without long waiting periods. The durable stainless steel construction also ensures longevity and resilience under rigorous use.

The machine is equipped with a large drip tray that accommodates various pot sizes, ensuring versatility for different types of coffee vessels. Its compact design allows it to fit snugly within any countertop setup, optimizing space while still delivering high performance.

Ease of service is another highlight of the Bunn 39130.0000J. The machine has a user-friendly interface that simplifies operation and maintenance. It also comes equipped with features that make cleaning and upkeep straightforward, essential for busy environments where downtime must be minimized.

Overall, the Bunn 39130.0000J stands out for its remarkable combination of speed, quality, and user-friendliness. Its robust brewing capabilities, stainless steel construction, and simple maintenance make it an excellent choice for businesses aiming to serve high-quality coffee efficiently. Whether in a bustling café or a corporate office, this model guarantees satisfying coffee experiences that keep patrons coming back for more.