Bunn 39130.0000J Operating Controls, Enable Brew ON/OFF Switch, Brew Switch, Main ON/OFF Switch

Page 7

OPERATING CONTROLS

P3633

 

 

A

B

C

D

 

 

 

P3969.50

 

(A) ENABLE BREW ON/OFF SWITCH

Pressing the "ENABLE BREW ON/OFF" switch (indicator on) supplies power to the brew station warmer and enables the brew circuit. Pressing the switch again (indicator off) stops brewing and de-energizes the brew station warmer. Stopping a brew cycle after it has been started will not stop the flow of water into the server until the funnel is empty.

(B) BREW SWITCH

Momentarily pressing and releasing the switch starts a brew cycle when the "ENABLE BREW ON/OFF" indicator is on.

(C) ADDITIONALWARMER or HALF/FULL BATCH SWITCHES Pressing any additional warmer switch so that the indica-

tor is on, supplies power to the associated warmer.

NOTE 1: APS & TC models have no warmers.

NOTE 2: These switches are Half/Full Batch on "Single Axiom" models.

(D) MAIN ON/OFF SWITCH

This switch, located on the left side of the brewer, turns power on and off to all components in the brewer.

COFFEE BREWING

 

1.

Begin each brew cycle with a clean empty brew

 

 

funnel.

 

2.

Insert a BUNN filter into the funnel.

 

3.

Pour (or grind) fresh coffee into the filter and level

 

 

the bed of grounds by gently shaking.

 

4.

Slide the funnel into the funnel rails until it stops.

 

5.

Place an empty server under the funnel.

 

6.

Verify that the "ENABLE BREW ON/OFF" indicator

 

 

is on.

 

7.

Momentarily press and release the "BREW" switch.

 

 

The display will read "NOW BREWING", and show

 

 

the time remaining in the brew cycle.

 

8.

Following the brew, the display reads "DRIPPING"

 

 

which shows the time remaining until the coffee no

 

 

longer drips from the funnel tip.

 

9.

After the coffee finishes dripping from the funnel

 

 

tip, carefully remove the brew funnel and discard

 

 

the grounds and filter.

 

NOTE: Some models are equipped with a backup

 

pour in feature, in case the plumbed water supply is

 

disrupted. In this event, disregard steps 7-8, and pour

 

in 64 ounces of fresh water.

 

 

Page 7

39130 092110

 

 

Image 7
Contents Installation & Operating Guide BUNN-O-MATIC Commercial Product Warranty Introduction ContentsUser Notices CE Requirements Electrical Requirements240V 2 Wire + Ground 120V 2 Wire + GroundInitial SET-UP Plumbing RequirementsOperating Controls Enable Brew ON/OFF SwitchBrew Switch Main ON/OFF SwitchTank Drain CleaningProgramming Switches Adjustments & Optional SettingsCont Done YES No Done YES YES Done Enable CleanService Tools ? Noyes Brew Counters ? Level 2 Enter Asset # ? SET Pulse Brew ? Drip Time

39130.0000J specifications

The Bunn 39130.0000J is a prominent model in the world of commercial coffee brewing, known for its innovative features and reliable performance. This coffee maker is designed specifically for high-demand environments such as cafes, restaurants, and offices, where efficiency and quality are paramount.

One of the key features of the Bunn 39130.0000J is its ability to brew large volumes of coffee quickly. The machine can produce up to 3.8 gallons of coffee per hour, making it ideal for busy settings where time is of the essence. With a simple on/off control, operators can easily manage brews throughout the day without the need for complicated programming.

The brewing process benefits from Bunn's proprietary brewing technology, which ensures optimal extraction and flavor. The machine utilizes a patented brewing system that maintains consistent water temperature during the brewing cycle, delivering a superior cup of coffee every time. This system is designed to enhance the rich flavors and aromas, providing a quality experience for customers.

Additionally, the Bunn 39130.0000J features a large, stainless steel water tank. This tank holds a significant amount of water, allowing for a quick heat-up time and enabling the machine to continuously brew without long waiting periods. The durable stainless steel construction also ensures longevity and resilience under rigorous use.

The machine is equipped with a large drip tray that accommodates various pot sizes, ensuring versatility for different types of coffee vessels. Its compact design allows it to fit snugly within any countertop setup, optimizing space while still delivering high performance.

Ease of service is another highlight of the Bunn 39130.0000J. The machine has a user-friendly interface that simplifies operation and maintenance. It also comes equipped with features that make cleaning and upkeep straightforward, essential for busy environments where downtime must be minimized.

Overall, the Bunn 39130.0000J stands out for its remarkable combination of speed, quality, and user-friendliness. Its robust brewing capabilities, stainless steel construction, and simple maintenance make it an excellent choice for businesses aiming to serve high-quality coffee efficiently. Whether in a bustling café or a corporate office, this model guarantees satisfying coffee experiences that keep patrons coming back for more.