Bunn 40885.0000E manual Electrical Requirements

Page 4

ELECTRICAL REQUIREMENTS

WARNING - If the power cord is ever damaged, it must be replaced by the manufacturer or its service agent with a special cord available from the manufacturer or its service agent in order to avoid a hazard.

Refer to Data Plate on the Brewer, and local/national electrical codes to determine circuit requirements.

WHI

N

BLU

L3

RED

L2

BLK

L1

GREENGREEN

120/208 and 120/240 volt ac three phase, 50/60 Hz models

BLK BLU

TO MACHINE

WHI

RED

 

L1

L2

L3

N

FROM POWER SOURCE

FOR SINGLE PHASE OPERATION MOVE BLU WIRE INTO TERMINAL BLOCK WITH BLACK WIRE. CONNECT INPUT WIRING TO:

L1, L2 & N FOR 120/208V & 120/240V MODELS,

L1 & N for 230V MODELS.

WHI

N

BLU

L3

RED

L2

BLK

L1

GREENGREEN

400/230V volt ac three phase,

50/60 Hz models

Note: This electrical service consists of 4 cur- rent carrying conductors (Neutral, L1, L2 and L3) and a separate conductor for earth ground.

Note: This electrical service consists of 4 cur- rent carrying conductors (Neutral, L1, L2 and L3) and a separate conductor for earth ground.

SYSTEM

 

 

VOLTAGE

V1

V2

208

208

120

240

240

120

L1, L2, L3, are the 3 phases

V1 = Phase to phase voltage, between any 2 phases.

V2 = Phase to neutral voltage, L1 to neutral must be 120V.

SYSTEM

 

 

VOLTAGE

V1

V2

400

400

230

230

 

230

L1, L2, L3, are the 3 phases

V1 = Phase to phase voltage, between any 2 phases.

V2 = Phase to neutral voltage, L1 to neutral must be 230V.

ELECTRICAL HOOK-UP

CAUTION – Improper electrical installation will damage electronic components. Damage caused by incorrect electrical connections is not covered by warranty.

1.An electrician must provide electrical service as specified in conformance with all local, state and federal electrical codes.

2.Using a voltmeter, check the voltage and color coding of each conductor at the electrical source.

NOTE - The brewer is shipped without a plug on the power cord. Qualified service personnel must select and install the proper UL listed grounding type attachment plug specified on the rear of the brewer.

3.Install the specified plug on the attached power cord.

4.Remove the front access panel to gain access to the terminal block.

5.Connect the brewer to the power source and verify the voltage at the terminal block before proceeding.

6.If plumbing is to be hooked up later be sure the brewer is disconnected from the power source. If plumbing has been hooked up, the brewer is ready for Initial Set-Up.

Page 4

40885 080108

 

Image 4
Contents Titan Single BUNN-O-MATIC Commercial Product Warranty User Notices #37881.0000120/208 and 120/240 volt ac three phase, 50/60 Hz models Electrical RequirementsCE Requirements Plumbing RequirementsPlumbing Hook UP Tank DrainMain ON/OFF Switch Operating ControlsInitial SET-UP Viewing Asset & Serial NumberCoffee Brewing Cleaning

40885.0000E specifications

The Bunn 40885.0000E is a highly regarded commercial coffee brewer that brings efficiency and convenience to high-demand environments. It is engineered to deliver consistent, high-quality coffee while catering to the needs of busy settings like restaurants, cafes, and office break rooms.

One of the standout features of the Bunn 40885.0000E is its capacity to brew large quantities of coffee in a short amount of time. With the ability to produce up to 14 cups of coffee per cycle, it allows for rapid service, ensuring that customers or employees are not kept waiting. This is particularly beneficial during peak hours when demand is high.

The brewer boasts an intuitive design, featuring user-friendly controls that enhance its functionality. The programmable digital control allows users to set precise brewing parameters, ensuring each batch meets their specific taste and aroma preferences. This flexibility is ideal for establishments that serve a diverse clientele with varying coffee taste profiles.

In terms of technologies, the Bunn 40885.0000E incorporates advanced brewing systems, including a stainless steel brew bowl that helps maintain temperature stability throughout the brewing process. This ensures that the coffee is brewed at optimal temperatures, enhancing extraction and flavor. The machine also utilizes a satellite carafe system, which is designed to keep coffee hot without the need for a warming plate, minimizing the risk of over-brewing and burnt flavors.

Durability is another hallmark of the Bunn 40885.0000E. Constructed with high-quality materials, this coffee brewer is built to withstand the rigors of a commercial environment. The robust design means that it can handle constant use without compromising performance or quality.

Furthermore, the machine supports easy maintenance and cleaning, an essential aspect for any commercial operation. With removable components and a straightforward design, operators can keep it in top condition with minimal effort, ensuring the longevity of the equipment.

In conclusion, the Bunn 40885.0000E is a powerful commercial coffee brewer that combines efficiency, quality, and durability. Ideal for high-demand settings, it offers impressive brewing capacity, advanced technology, and ease of maintenance, making it a top choice for establishments that prioritize exceptional coffee service.