Bunn 38791.0000K service manual Priming the Concentrate Lines, Draining the HOT Water Tank

Page 16

PRIMING THE CONCENTRATE LINES

1.Open the dispenser door.

2.Select Prime on the Function Selector Switch and Run on the Mode Selector Switch.

3.Close the dispenser door.

4.Place a container under the dispense tip.

5.Activate the appropriate dispenser until concentrate flows from the dispense nozzle. Priming may take 5 to 10 seconds.

6.Open the dispenser door, select Normal on the Function Selector Switch.

Note: Concentrate may continue to drip out of dispense tip. The user may wish to Rinse (refer to Rinsing) the dispenser to clean out the remaining concentrate.

2 6

2

DRAINING THE HOT WATER TANK

CAUTION: The dispenser must be disconnected from the power source throughout these steps.

1.Disconnect the dispenser from the power source.

2.Shut off and disconnect the incoming water supply.

3.Remove the right side access panel.

4.Pull out drain tube to empty into a sink or a container with a minimum of 200 ounce capacity.

5.Make sure drain clamp is closed, then remove drain plug.

6.Direct tube into sink or container and open drain clamp. Continue draining tank until ALL of the water is out. Be careful when draining the water as it may be very hot.

7.Close drain clamp, insert drain plug, place drain tube back into machine, and replace the right side access

panel.

Note: The dispenser must be refilled using the Initial Fill & Heat steps before reconnecting the power source.

16

38791 031606

 

Image 16
Contents LCA-2 LP Phone 217 529-6601 FAX 217BUNN-O-MATIC Commercial Product Warranty Contents User Notices 00656.0001 37881.0000 11646.0002 00824.0002Electrical Requirements IntroductionPlumbing Requirements Initial SET-UP Plumbing HOOK-UP Early ModelsPlumbing HOOK-UP Late Models Turn on the water supply and check for leaksElectrical HOOK-UP Operating Controls and InterfacePage Installing Pump Tubing Installing the Pump TubingInitial Fill & Heat Rinse Alarm Feature Alarm Level Selected Alarm ModeDisabled None Serve productDisplay Mode Description Programming the DispenserLCD Display Home ViewProgramming the Dispenser Display Mode 0 06 0 LC x1 8 Program Mode DescriptionProgramming the Dispenser Programming the Dispenser Program Mode LCD Display Program Mode DescriptionLC 0 x Right Decaf Dispense TotalPriming the Concentrate Lines Draining the HOT Water TankOperating the Dispenser Cleaning & Preventative Maintenance General Cleaning and Sanitizing Procedures Daily RinsingDaily Parts Washing Weekly SanitizingPreventive Maintenance Replacing the Pump TubingC1 r u n C1 2C2 r u n C2 2C4 r u n C4 1C6 2 0 C7 En gTroubleshooting Guide Error CodesError EC 0 0Troubleshooting Guide Error Codes 0 1Calibrating the Dispenser Flow Rates Field Calibrating the Empty Product Warning Calibrating The Empty Product ThresholdSchematic Wiring Diagram LCA-2 LP COM N.O

38791.0000K specifications

The Bunn 38791.0000K is an innovative coffee maker that has gained popularity among both home users and commercial establishments. Designed for those who appreciate efficiency and quality, this machine boasts a range of features that enhance the brewing experience.

One of the standout characteristics of the Bunn 38791.0000K is its high-capacity brewing system, which allows users to brew up to 3.8 gallons of coffee per hour. This rapid brewing capability makes it an ideal choice for settings that require a continuous supply of freshly brewed coffee, such as busy offices, cafes, and restaurants.

The coffee maker is equipped with a stainless steel water tank that maintains optimal brewing temperatures, ensuring that each cup of coffee is brewed to perfection. This consistent temperature control is crucial for extracting the full flavor from coffee grounds, resulting in a rich and aromatic brew every time.

Another key feature of the Bunn 38791.0000K is its patented brewing technology, which uses a pulse brew process. This method allows for adjustable brew times and water flow rates, giving users the flexibility to customize their brewing experience. Whether you prefer a strong, bold flavor or a milder brew, this technology caters to various taste preferences.

Additionally, the machine is designed for ease of use and maintenance. It features a simple interface, making it user-friendly for both novice and experienced coffee enthusiasts. The removable brew basket and easy-to-access water reservoir simplify cleaning and refilling, which is especially beneficial in high-demand environments.

The Bunn 38791.0000K is also equipped with a hot water faucet, allowing users to dispense hot water for tea or instant soups, further enhancing its versatility in any setting. This feature makes it a multi-functional appliance that can cater to various beverage needs.

Built with durability in mind, this coffee maker features a robust construction that withstands the rigors of daily use. Its stainless steel finish not only provides a sleek, modern look but also contributes to its longevity.

In summary, the Bunn 38791.0000K stands out in the realm of coffee makers due to its impressive brewing capacity, advanced technology, user-friendly design, and durability. Whether used in a home kitchen or a bustling cafe, it delivers coffee quickly and efficiently, ensuring satisfaction with every cup.