Bunn 38791.0000K Cleaning & Preventative Maintenance, Daily Parts Washing, Weekly Sanitizing

Page 18

CLEANING & PREVENTATIVE MAINTENANCE

General Cleaning and Sanitizing Procedures

Note: The BUNN® LCA-2 LP dispenser incorporates a “user selectable” rinse reminder feature, which lights the Rinse LED on the front panel when it is time to rinse. See Programming Functions to activate this feature.

Daily: RINSING

1.Open the dispenser door and set the Function Switch to Rinse and the Mode Selector Switch to RUN.

2.Close the dispenser door and place a 1/2 gal (2 liter) container under the dispense nozzle area.

3.Activate both dispense switches until the water is clear or has no concentrate coloring in it, (10 to 20 sec.).

4.Open the dispenser door, set the Function Switch back to Normal.

Note: To clear the “Rinse” warning, activate both dispense switches (one at a time) until the flow stops automatically (approximately 20 sec. for each tip). The “Rinse” LED will turn off when the Rinse time has been satisfied.

Daily: PARTS WASHING

1.Remove and wash the drip tray and drip tray cover in a mild detergent solution. Rinse thoroughly.

2.Wipe the splash panel, dispense nozzles, door, and cabinet with a clean damp cloth.

Weekly: SANITIZING

1.Open dispenser door and select Prime on the Function Selector Switch and Run on the Mode Selector Switch.

2.Remove bag connector from the product box and disassemble or prop open the internal valve to allow free flow of product through the connector.

Note: Cutting the mating fittings from an empty bag makes an excellent “free flowing” connector for this purpose.

3.Place bag connector into a one gallon (3.8 liter) container of warm soapy tap water 140F (60C).

4.Place an empty container under dispense tip and activate corresponding Dispense Switch until clean soapy water is dispensed from the dispense tip.

5.Repeat steps 3 and 4 with warm tap water 140F (60C) to rinse the soapy water from the pump tubing. Con- tinue activating Dispense Switch until water is clear, and no soapy water is being dispensed.

6.Prepare 2.5 gallons (9.5L) of sanitizing solution by dissolving 1 packet of Kay 5 sanitizer into 2.5 gallons (9.5L) of 120F (48.9C) water to ensure 100 ppm of available chlorine.

7.Repeat steps 3 and 4 with the sanitizing solution. Once sanitizing solution is visible, continue to dispense for 1 minute. Release handle and allow solution to sit for 5 minutes.

8.After soaking for 5 minutes, activate the dispense switch a second time, this time for 2 minutes. After 2 minutes, release the dispense switch.

9.Repeat step 5 with warm tap water to flush sanitizing solution out of the pump tubing.

10.Remove mating connector from the bag connector.

11.Reattach bag connector to product box.

12.Select Normal on Function Selector Switch and Run on Mode Selector Switch.

13.Actuate Dispense Switch until concentrate/water mixture appears. Continue to dispense at least 12 oz. (355 ml) of concentrate/water mixture and discard.

14.Repeat steps 1 through 13 for other dispense head.

18

38791 063009

 

Page 17 Page 19
Image 18
Page 17 Page 19
Contents LCA-2 LP Phone 217 529-6601 FAX 217BUNN-O-MATIC Commercial Product Warranty Contents User Notices 00656.0001 37881.0000 11646.0002 00824.0002Introduction Electrical RequirementsPlumbing Requirements Plumbing HOOK-UP Late Models Initial SET-UPPlumbing HOOK-UP Early Models Turn on the water supply and check for leaksElectrical HOOK-UP Operating Controls and InterfacePage Installing Pump Tubing Installing the Pump TubingInitial Fill & Heat Disabled None Rinse Alarm FeatureAlarm Level Selected Alarm Mode Serve productLCD Display Display Mode DescriptionProgramming the Dispenser Home View6 0 Programming the Dispenser Display Mode0 0 LC xProgram Mode Description 1 8Programming the Dispenser LC 0 x Programming the Dispenser Program ModeLCD Display Program Mode Description Right Decaf Dispense TotalPriming the Concentrate Lines Draining the HOT Water TankOperating the Dispenser Daily Parts Washing Cleaning & Preventative MaintenanceGeneral Cleaning and Sanitizing Procedures Daily Rinsing Weekly SanitizingPreventive Maintenance Replacing the Pump TubingC2 r u n C1 r u nC1 2 C2 2C6 2 0 C4 r u nC4 1 C7 En gError Troubleshooting GuideError Codes EC 0 0Troubleshooting Guide Error Codes 0 1Calibrating the Dispenser Flow Rates Field Calibrating the Empty Product Warning Calibrating The Empty Product ThresholdSchematic Wiring Diagram LCA-2 LP COM N.O

38791.0000K specifications

The Bunn 38791.0000K is an innovative coffee maker that has gained popularity among both home users and commercial establishments. Designed for those who appreciate efficiency and quality, this machine boasts a range of features that enhance the brewing experience.

One of the standout characteristics of the Bunn 38791.0000K is its high-capacity brewing system, which allows users to brew up to 3.8 gallons of coffee per hour. This rapid brewing capability makes it an ideal choice for settings that require a continuous supply of freshly brewed coffee, such as busy offices, cafes, and restaurants.

The coffee maker is equipped with a stainless steel water tank that maintains optimal brewing temperatures, ensuring that each cup of coffee is brewed to perfection. This consistent temperature control is crucial for extracting the full flavor from coffee grounds, resulting in a rich and aromatic brew every time.

Another key feature of the Bunn 38791.0000K is its patented brewing technology, which uses a pulse brew process. This method allows for adjustable brew times and water flow rates, giving users the flexibility to customize their brewing experience. Whether you prefer a strong, bold flavor or a milder brew, this technology caters to various taste preferences.

Additionally, the machine is designed for ease of use and maintenance. It features a simple interface, making it user-friendly for both novice and experienced coffee enthusiasts. The removable brew basket and easy-to-access water reservoir simplify cleaning and refilling, which is especially beneficial in high-demand environments.

The Bunn 38791.0000K is also equipped with a hot water faucet, allowing users to dispense hot water for tea or instant soups, further enhancing its versatility in any setting. This feature makes it a multi-functional appliance that can cater to various beverage needs.

Built with durability in mind, this coffee maker features a robust construction that withstands the rigors of daily use. Its stainless steel finish not only provides a sleek, modern look but also contributes to its longevity.

In summary, the Bunn 38791.0000K stands out in the realm of coffee makers due to its impressive brewing capacity, advanced technology, user-friendly design, and durability. Whether used in a home kitchen or a bustling cafe, it delivers coffee quickly and efficiently, ensuring satisfaction with every cup.
Top Page Image Contents