Rear Panel Connections and Controls

100-240V	0.4A	DVI-RGB 200				SOG ON/OFF	HIGHREFRESH		R	G	B
			BUFFERED		EDID			EDID
		DVI-DINPUT			SOURCE
					SOURCE				H	V	S
			LOOP-THROUGH		MONITOR			SELECT
			LOOP-THROUGH		MONITOR
50/60 Hz					SELECTOR		LOW			OUTPUT
50/60 Hz							LOW

7		1	2	4	6			5		3

Figure 2. DVI-RGB 200 Rear Panel

A Input connector — Connect a single link of direct digital video to this 29-pin DVI-I connector (figure 2) using the included cable.

B Buffered Loop-through connector — If desired, connect a direct digital local monitor to this 29-pin DVI-I connector.

NOTE: The user can also record EDID from a display on the Buffered Loop-Through

connector, store it onto the units internal memory and supply to the source

(DVI-D input). See Capturing a User-recorded EDID.

C Output connectors — Connect an RGB display to these female BNC connectors.

For RGBHV video — Connect to five BNC connectors as shown at right. Ensure that the SOG On/Off switch (F) is turned off.

For RGBS video — Connect to four BNC connectors as shown at right. Ensure that the SOG On/Off switch (F) is turned off.

R G B

H V S

R G B

H V S

For RGsB video — Connect to three BNC connectors as shown at right. Ensure that the SOG On/Off switch (F) is turned on.

D EDID Source switch — Set this switch to the Monitor (up) position	R	G	B

to connect the DDC channel between the direct digital video source	H	V	S
and the local monitor.	H	V	S
and the local monitor.

Set this switch to the Selector (down) position to connect the DDC channel between the direct digital video source and the built-in

DVI-RGB 200 EDID logic.

E EDID Select — If the EDID Source switch (D) is in the Selector position, set this switch to the appropriate position to select the desired video resolution. Use the Refresh DIP switch (F) to select the refresh rate. Table 1 identifies the switch positions and the associated resolutions and vertical refresh rates.

Table 1. Video resolution

EDID Select		Refresh		EDID Select		Refresh		EDID Select		Refresh
	Switch	DIP Switch			Switch	DIP Switch			Switch	DIP Switch
Pos.	Resolution	<	>	Pos.	Resolution	<	>	Pos.	Resolution	<	>
		Dwn	Up			Dwn	Up			Dwn	Up
0	User EDID	See page 6		6	1280x1024	50 Hz 60		C	1680x1050	50 Hz 60

1	800x600	50 Hz 60		7	1360x768	50	Hz 60	D	1920x1080	50 Hz 60
2	1024x768	50 Hz 60		8	1366x768	50	Hz 60	E	1920x1200	50 Hz 60

3	1280x720	50	Hz 60	9	1400x1050	50	Hz 60	F	N/A
4	1280x768	50	Hz 60	A	1440x900	50	Hz 50

5	1280x800	50	Hz 60	B	1600x1200	50 Hz 60

NOTE: Many monitors will not support all of the resolutions and refresh rates

shown. If you get no display, try a different rate.

DVI-RGB 200 • Installation and Operation

DVI-RGB 200 specifications

The Extron DVI-RGB 200 is a versatile and advanced video distribution amplifier designed to meet the demanding needs of professional audio-visual installations. This device provides robust signal management and exceptional image quality for DVI and RGB video signals, making it an essential tool for AV professionals.

One of the standout features of the DVI-RGB 200 is its ability to handle a variety of video formats. The device supports DVI, RGB, and component video signals, facilitating seamless integration with numerous source devices such as computers, Blu-ray players, and other multimedia equipment. This flexibility ensures that users can rely on the DVI-RGB 200 for a wide range of applications, from classroom settings to corporate environments.

The Extron DVI-RGB 200 incorporates advanced technologies that enhance video performance. With its high bandwidth capability, the device can transmit video signals with resolutions up to 1920x1200 at 60 Hz. This ensures that the image quality remains crisp and detailed, even when extended over long distances. The DVI-RGB 200 utilizes digital signal processing to guarantee accurate signal reproduction and minimize artifacts, an essential consideration in high-stakes AV presentations.

Furthermore, the DVI-RGB 200 features multiple outputs, enabling users to connect multiple displays without signal degradation. With support for up to eight outputs, the device is ideal for distributing video signals to several locations simultaneously, a valuable asset in environments where multiple screens are required for presentations or information display.

Another important characteristic of the Extron DVI-RGB 200 is its user-friendly design. The device includes easy-to-read LED indicators that provide real-time information about signal status and operational conditions. Installation and setup are straightforward, thanks to the compact form factor and intuitive layout of ports and controls.

The DVI-RGB 200 also incorporates Extron's patented Electronically Balanced output design, which ensures that the device can operate over long cable runs without introducing noise or signal dropouts. Additionally, the built-in input equalization enhances signal integrity, providing a reliable solution for long-distance video transmission.

In summary, the Extron DVI-RGB 200 combines advanced signal management capabilities with a user-friendly design. Its compatibility with various video formats, exceptional image quality, and robust features make it a go-to choice for AV professionals seeking a reliable distribution amplifier for their installations. Whether in a conference room, classroom, or any other multimedia environment, the DVI-RGB 200 stands out as a dependable and high-performing solution for video signal distribution.