Function of settings:
Power Levels: Not used in current configuration.
Temperature: The temperature the oven will bake at for the specified phase. Can be set from 122 F to 482 F (50 C to 250 C)
Bake Duration: The length of time in minutes the oven will bake in the specified phase. For example, Phase 1 set at 2 min., Phase 2 set at 4 min., and Phase 3 set at 10 min. has a total bake time of 16 minutes.
Steam Duration: The length of time in seconds that steam will be injected into the oven at the beginning of the phase.
Note: Can be set from 0 to 20 seconds and will only operate if the temperature is above 250 F (120 C).
Fan Cycles: The number of times the fan will reverse rotation from clockwise to counterclockwise and back.
Note: Can be set from 0 to 9. Do not set the fan cycles number higher than 1 cycle per minute of bake time.
Fan Dwell: The amount of time in seconds that the fan will stay off during a rotation change.
Note: Can be set from 8 to 15.
Note: The heating elements are off during the Fan Dwell time.
Damper Delay: The amount of time in minutes the damper will wait before opening during one bake cycle.
Note:
Can be set from 0 to 99.
If this time is set higher than the total bake time, the damper will not open.
The damper will only open once during a complete bake cycle and will close at the end of the bake cycle.
Belshaw Bros., Inc. 1750 22nd Ave. S. Seattle, WA 98144 Phone
4 | BXC Smartbake Oven |