Elkay ER10.2C installation instructions Installation Instructions, = 3/8 O.D. Tube Tank Drain

Page 1

ER10-2C/3C, TR210-2C

Installation Instructions

ER10-2C/3C, TR210-2C

Refrigeration Packages

NOTE: It is important to insure proper ventilation. Allow a minimum clearance of 6 inches (152 mm) in front and 3 inches (76mm) in the rear of the unit. If unit is to be installed in an enclosure, allow the following clearances around unit 1 inch (25mm) each side, 3 inches (76mm) in the rear, 3 inches (76mm) inches above wall.

This chiller has been designed for use with potable water and includes an

o-ring seal on the drain plug. This fitting should be replaced if the unit is to be used with more aggressive fluids.

NOTA: Es importante asegurar ventilación apropiada. Asignar una holgura mínima de 6 pulgadas (152 mm) en frente y 3 pulgadas (76 mm) en la parte trasera de la unidad. Si la unidad va a ser instalada en un recinto, asignar la siguiente holgura alrededor de la unidad: 1 pulgada (25 mm) a cada lado, 3 pulgadas (76 mm) en la parte trasera, 3 pulgadas (76 mm) por encima de la pared.

Este congelador ha sido diseñado para su uso con agua potable e incluye un empaque de anillo sellador en el tapón de drenaje. Se deberá cambiar el accesorio si la unidad será usada con fluidos más agresivos.

NOTE: Il est important de s’assurer d’avoir une bonne ventilation. Laissez au moins 6 pouces (152 mm) devant l’appareil et 3 pouces (76 mm) à l’arrière. Si l’appareil est installé dans une enceinte, laissez les distances suivantes autour de lui : 1 pouce (25 mm) de chaque côté, 3 pouces (76 mm) à l’arrière et au dessus du mur.

Ce refroidisseur est conçu pour l’eau potable et comprend un joint torique d’étanchéité sur la bonde. Ce raccord doit être remplacé si l’appareil utilise des liquides plus agressifs.

LEGEND

A = 3/8" O.D. TUBE WATER OUT

D = TEMPERATURE ADJUSTMENT

TUBO DE 3/8" DE DIÁMETRO EXTERNO DE SALIDA DE AGUA

AJUSTE DE TEMPERATURA

TUBE DE SORTIE D’EAU DE D.E. 3/8"

RÉGLAGE DE TEMPÉRATURE

B = 3/8" O.D. TUBE WATER INLET

E = ELECTRICAL

TUBO DE 3/8" DE DIÁMETRO EXTERNO DE ENTRADA DE AGUA

ELÉCTRICO

TUBE D’ENTRÉE D’EAU DE D.E. 3/8"

ÉLECTRICITÉ

C = 3/8" O.D. TUBE TANK DRAIN

 

TUBO DE 3/8" DE DIÁMETRO EXTERNO DESAGÜE DEL TANQUE

 

TUBE DE D.E. 3/8" DE VIDANGE DU RÉSERVOIR

 

97600C (4/00)

Image 1
Contents = 3/8 O.D. Tube Water OUT = Temperature Adjustment Installation InstructionsER10-2C/3C, TR210-2C Refrigeration Packages = 3/8 O.D. Tube Water Inlet = ElectricalDescription Descripción 5, 6 12,13,14, 15 17,18

ER10.2C specifications

The Elkay ER10.2C is a high-performance reverse osmosis water filtration system designed to provide clean and pure drinking water for homes and offices. This advanced system is recognized for its ability to efficiently remove contaminants and impurities, ensuring that the water you consume is of the highest quality.

One of the standout features of the Elkay ER10.2C is its innovative reverse osmosis technology. The reverse osmosis process involves pushing water through a semipermeable membrane that traps harmful particles, such as lead, chlorine, and other harmful chemicals. This results in water that is not only tastier but also safer for consumption.

The ER10.2C model boasts a two-stage filtration process, which enhances its effectiveness in reducing various contaminants. The first stage typically involves the use of a sediment filter that captures larger particles like rust and dirt. The second stage focuses on the reverse osmosis membrane, ensuring that fine impurities are effectively eliminated. This dual-action filtration guarantees a comprehensive purifying effect, making water suitable for drinking, cooking, and other household uses.

Another key characteristic of the Elkay ER10.2C is its compact and space-saving design. This system is easily installed under a sink, ensuring that it does not take up valuable counter space. Its sleek construction also allows it to blend seamlessly with kitchen decor, making it a practical and aesthetically pleasing addition to any home.

The Elkay ER10.2C is equipped with an upgraded monitoring system that alerts users when filter changes are necessary. This technology not only helps maintain water quality but also allows for easy maintenance, ensuring that the system functions optimally throughout its lifespan.

In terms of performance, the Elkay ER10.2C delivers an impressive flow rate, providing quick access to purified water without the need for a booster pump. This makes it an efficient choice for households with high water demands.

Overall, the Elkay ER10.2C reverse osmosis water filtration system stands out due to its effective filtration capabilities, efficient design, and user-friendly features. With this system, users can enjoy peace of mind knowing that they are drinking high-quality water, free from impurities and contaminants. It is a significant investment in health, particularly for families looking to improve their water quality for everyday use.