CDA SV430 manual Installation, How to install your oven, Dimensions Oven Housing

Page 14

Installation

Important

If the oven is being installed into a built under oven housing unit ensure that the front rail at the top of the unit is not

installed as it could restrict ventilation.

Ensure that air can flow freely around the housing area. If the oven is being installed into a fully enclosed built-under oven housing unit it may be necessary to cut a small slot in the top of the plinth fitted under the unit. Cut a section 400mm wide and a minimum of 15mm high to allow air to pass under the unit. Alternatively cut a section 400 x450mm in the base of the carcass as indicated.

Failure to allow adequate ventilation to the appliance may result in overheating or damage to adjacent units and could

invalidate the warranty.

The walls of the kitchen units must be able to withstand temperatures of 75°C above ambient (typically this is between

90°C and 100°C). This appliance is type X installation.

When correctly installed ensure that there is a gap of 6mm minimum between the sides of the oven and adjacent

furniture doors.

Lift the oven carefully into position on the shelf, taking care NOT to lift it by the door handle. If you open the oven door, you will see 2 screw holes, 1 on each side of the oven. The oven should then be secured to the housing by fitting screws into these holes. Remember the housing should not be free standing but be secured to the wall and/or adjacent fittings.

How to install your oven

You will need the following housing area fit your oven correctly.

Dimensions

Oven

Housing

 

 

 

Height (mm)

457

450

 

 

 

Width (mm)

592

560

 

 

 

Depth (mm)

571

560 (min)

 

 

 

The oven is designed to fit into a cabinet of 600mm width. The oven can be built in or built under the kitchen units, but you must ensure that it is properly ventilated. In the diagram the built-in oven is ventilated by means of a space at the top of the kitchen cabinet. There are many other methods of ventilating your oven - Consult a qualified engineer for advice.

 

 

 

 

450

 

 

 

100

 

 

550

 

 

 

 

 

 

450575

 

594

 

 

 

 

457

 

 

 

 

 

 

575450

 

560

5

499549

560

 

928

 

 

 

 

 

22-4

 

400

 

 

20

 

560

 

 

 

 

 

 

450

 

 

 

 

560

 

 

fig. 14

 

 

 

 

13

Image 14
Contents SV430 Compact Oven CE Declarations of Conformity User informationAppliance information Using the touch control First use of the ovenUsing your oven Control Panel and DisplayControl Panel and Display Minute minder General Settings and UseClock To programme the oven Fanned Grill preset 190˚ range available 100-250˚ Preheat booster preset 200 range availableFan With Lower Heat preset 150˚ range available 75-250˚ Oven functionsFan Oven preset 190˚ range available 75-250˚ Fan Assisted Oven preset 175˚ range available 75-220˚Enamelled parts Cleaning and MaintenanceStainless steel Care and Maintenance Cleaning the interior of the doorClac Error Code Fault TroubleshootingProblem Possible Cause Advice Dimensions Oven Housing InstallationHow to install your oven Mains Electricity Connection Customer Care Department 01949 862

SV430 specifications

The CDA SV430 is a sophisticated integrated wine cooler design that caters to wine enthusiasts looking for a reliable and aesthetically pleasing solution for wine storage. With a strong focus on functionality and cutting-edge technology, the SV430 stands out in the competitive market of wine coolers.

At a glance, the SV430 boasts a sleek and modern design, featuring a stainless-steel frame and a stylish glass door, allowing consumers to showcase their wine collection. One of the main features of this model is its dual-zone cooling technology, which enables users to store red and white wines at optimal temperatures simultaneously. The upper zone operates between 6 to 14 degrees Celsius, perfect for whites, while the lower zone ranges from 15 to 20 degrees Celsius, ideal for reds. This flexibility in temperature control enhances the wine’s overall taste and longevity.

The cooling system employs advanced compressor technology that not only maintains a stable internal temperature but also operates quietly, making it suitable for any home or setting. The SV430 is designed with energy efficiency in mind, minimizing power consumption while ensuring reliable performance.

Another notable characteristic of the CDA SV430 is its UV-protected glass door. This feature helps to shield wines from harmful UV rays, preserving the quality and flavor of the wine over time. The interior is equipped with soft LED lighting, which not only enhances visibility but also is gentler on the wine compared to traditional lighting options.

For convenience and functionality, the SV430 includes adjustable shelving, allowing users to accommodate various bottle sizes and shapes easily. The shelves are also made of durable wood, which adds a touch of elegance and provides proper support for wine bottles.

In terms of usability, the CDA SV430 comes with a user-friendly digital touchscreen control panel, enabling consumers to set their desired temperatures with precision. An integrated alarm system alerts users in case of any temperature fluctuations, ensuring that the wine remains in optimal condition.

Overall, the CDA SV430 wine cooler is a well-rounded appliance that combines cutting-edge technology, energy efficiency, and user-friendly features. Its stylish design and thoughtful characteristics make it an excellent addition to any wine lover's collection, ensuring that each bottle is stored properly and showcased beautifully.