CDA SV430 manual General Settings and Use, Clock, Minute minder

General Settings and Use

Clock

To set the clock when the time and the clock indicator are flashing (for example, when the oven is first switched on) turn the selection control knob until the correct time shows on the display, then touch to confirm the selection. The oven will beep to confirm the selection and the clock and clock indicator will stop flashing.

To set the clock once the time has been set (when the clock is not flashing) touch twice until the clock and the clock indicator flashes. Turn the selection control knob until the correct time shows on the display, then touch to confirm the selection. The oven will beep to confirm the selection and the clock and clock indicator will stop flashing.

Minute minder

This oven is equipped with a minute minder to count down for a maximum of 60 minutes. To set the timer, touch so the display flashes 0:00 and the minute minder indicator flashes. Turn the selection control knob until the required time shows on the display. The minute minder will set after three seconds delay and starting counting down.

The display will show the time remaining and the minute minder indicator will stay lit. At the end of the countdown, the minute minder indicator will flash and the oven will beep intermittently for approximately 80 seconds. To stop the end of timer alerts before that time, touch .

To check on the progress of the minute minder during a programme, touch until the minute minder indicator flashes and the time remaining will show on the display.

To cancel the minute minder touch until the minute minder indicator flashes and then turn the selection control knob until the display shows 0:00.

Fig.5

Fig. 6

5