CDA HCG520, HCG500 manual Natural Gas to LPG Conversion, LPG to Natural Gas Conversion

Page 8

Natural Gas to LPG Conversion

This hob can be converted from natural gas to propane operation at a nominal inlet pressure of 37mbar, or butane operation at a nominal inlet pressure of 28/30mbar. This conversion must only be carried out by a competent person (i.e. a Gas Safe registered fitter).

Instructions to fit replacement injectors:

 

Required:

• 7mm AF nut spinner

 

 

 

 

1.

Disconnect the appliance from the gas and electrical supplies.

•

Replacement injectors

2.

Remove burner components and pan supports.

•

LPG identity plate

3.

Remove the injectors and replace with the corresponding

 

 

 

 

 

 

 

 

injector as shown in the table below.

 

Fig.6

Setting up minimum flow rates:

1.Remove the control knobs.

2.Turn on the LP gas supply, light the burners and turn the controls to the minimum position, as indicated by the small flame.

3.Insert a 2.5mm screwdriver into the hole at the top of the tap and turn the adjustment screw fully clockwise as shown in figure 6.

4.Turn the controls to maximum position then quickly to the

minimum position - make sure the flame does not extinguish.

Required:

 

5. Replace the knobs.

• 7mm AF nut spinner

 

 

• Replacement injectors

LPG to Natural Gas Conversion

• NG identity plate

 

 

This hob can be converted from propane operation at a nominal inlet pressure of 37mbar or butane operation at a nominal inlet pressure of 28/30mbar to natural gas at 20mbar. This conversion must only be carried out by a competent person (i.e. a Gas Safe registered fitter).

Burner

LPG Injector

Natural Gas Injector

Rapid

85

115

 

 

 

Semi-Rapid

65

95

 

 

 

Auxiliary

50

69

 

 

 

Page 7 Page 9
Image 8
Page 7 Page 9
Contents HCG500 / HCG520 gas hobs Customer Care DepartmentPlease note Appliance informationCE Declarations of Conformity Control panel Using your hobGas burners Igniting the Burners Efficient use of your HobTo ignite the burners, follow these instructions Burner Size Minimum Pan Diameter cm Maximum Pan Diameter cmCare and Maintenance If your Hob is not workingContact CDA Customer Care What to do if you smell gasMains Electricity Connection Green & Yellow = Earth, Blue = Neutral, Brown = LiveVentilation Room Volume m Air Vent Required cmGas Supply Requirements Instructions to fit replacement injectors Required Setting up minimum flow ratesNatural Gas to LPG Conversion LPG to Natural Gas ConversionFitting the Hob Unpacking the hobFitting position of the hob If fitting a cooker hood above the hobHow to install the hob Page Customer Care Department

HCG500, HCG520 specifications

The CDA HCG520 and HCG500 are two standout models in the realm of modern kitchen appliances, blending stylish design with cutting-edge technology to elevate your cooking experience.

The CDA HCG520 features a robust construction, equipped with a sleek glass lid, which not only enhances its aesthetic appeal but allows for easy monitoring of your cooking progress. It boasts a powerful 5-burner gas hob, including a dual wok burner, ensuring that you can handle multiple pots and pans simultaneously. The HCG520 is designed with user convenience in mind, featuring intuitive control knobs positioned at the front for easy access. This model also includes a flame failure safety device, which automatically cuts off the gas supply if the flame goes out, providing peace of mind while cooking.

On the other hand, the HCG500 presents a more compact option without sacrificing performance. This model includes a 4-burner gas hob, making it an ideal choice for smaller kitchens or those looking to save space. The HCG500 maintains a modern design with stainless steel finishes and easy-to-clean surfaces, catering to both functionality and style. The burners in this model are designed for efficiency, providing rapid heating and simmer functions to accommodate various cooking needs.

Both the HCG520 and HCG500 utilize advanced technology to ensure optimal performance. The precise gas controls enable an excellent range of heat settings, which allows chefs to experiment with cooking techniques, from high-heat searing to gentle simmering. Additionally, the appliances feature a removable cast iron pan support, offering a sturdy base for your cookware while also making cleaning straightforward.

These models are designed to cater to the environmentally conscious consumer. The use of gas hobs in combination with energy-efficient burners aligns with sustainable cooking practices, reducing overall energy consumption.

In terms of characteristics, both appliances come with easy-to-follow installation guides, ensuring a smooth setup process. Customer reviews highlight the ease of use and reliability, with many praising their efficiency in daily cooking tasks.

Whether you opt for the HCG520 with its extensive features or the space-saving HCG500, both models deliver exceptional performance, enhanced safety, and stylish design that will complement any modern kitchen.
Top Page Image Contents