CDA HCG500, HCG520 manual Gas Supply Requirements, Ventilation, Room Volume m Air Vent Required cm

Page 7

Gas Supply Requirements

IMPORTANT: THIS APPLIANCE SHOULD BE FITTED BY A GAS SAFE REGISTERED FITTER OR OTHER SUITABLY QUALIFIED PERSON.

This installation must comply with the Gas Safety (installation and use) Regulations 1984.

This appliance is category II2H3+ and is designed for use in the UK and Ireland. The installation must comply with the Gas Safety (installation and use) Regulations 1984.

The CDA Group Ltd is not legally able to provide any assistance in the installation of gas appliances except to Gas

Safe registered installers. Any Gas Safe registered fitter requiring help must provide their name, address and registration number. Information supplied will be validated before help is provided.

This appliance is suitable for conversion to Liquid Petroleum Gas (G30 or G31). A kit is provided. Do not attempt to fit the conversion kit yourself.

This appliance is adjusted for natural gas (G20) at 20mbar only.

In the event that this appliance is not installed in accordance with the above requirements, the appliance may be disconnected from the mains gas supply until any faults are rectified; this is a legal requirement.

This appliance should be installed using 15mm copper pipe connected via a shut-off valve in an adjacent unit. The shut-off valve needs to be accessible in an emergency or for service purposes.

This appliance must not be connected to a combustion gas recovery scavenging system

The connection to the gas supply must comply with all current regulations in force.

We are not legally able to offer advice on the installation of gas appliances to non Gas Safe registered personnel.

Ventilation

All rooms require a window or equivalent (e.g. a door) which can be opened. Some rooms require a permanent vent in addition to a window (see below).

This unit must not be used in a room which is less than 5m3. The following table details the requirements based on the kitchen volume (L x W x H) in m3.

 

Room Volume (m3)

Air Vent Required (cm3)

 

5

100

 

 

 

 

 

 

6 to 10

50

 

 

 

 

 

6 to 11

No permanent vent required if a door opens to the outside

 

 

 

 

11 or more

None required

 

 

 

 

The above requirements also allow use of a gas oven and grill but if there are any other fuel burning appliances in the same room, consult the relevant British Standard (BS5440) or Gas Safe document.

Image 7
Contents Customer Care Department HCG500 / HCG520 gas hobsCE Declarations of Conformity Appliance informationPlease note Gas burners Using your hobControl panel Burner Size Minimum Pan Diameter cm Maximum Pan Diameter cm Igniting the BurnersEfficient use of your Hob To ignite the burners, follow these instructionsWhat to do if you smell gas Care and MaintenanceIf your Hob is not working Contact CDA Customer CareGreen & Yellow = Earth, Blue = Neutral, Brown = Live Mains Electricity ConnectionGas Supply Requirements Room Volume m Air Vent Required cmVentilation LPG to Natural Gas Conversion Instructions to fit replacement injectors RequiredSetting up minimum flow rates Natural Gas to LPG ConversionIf fitting a cooker hood above the hob Fitting the HobUnpacking the hob Fitting position of the hobHow to install the hob Page Customer Care Department

HCG500, HCG520 specifications

The CDA HCG520 and HCG500 are two standout models in the realm of modern kitchen appliances, blending stylish design with cutting-edge technology to elevate your cooking experience.

The CDA HCG520 features a robust construction, equipped with a sleek glass lid, which not only enhances its aesthetic appeal but allows for easy monitoring of your cooking progress. It boasts a powerful 5-burner gas hob, including a dual wok burner, ensuring that you can handle multiple pots and pans simultaneously. The HCG520 is designed with user convenience in mind, featuring intuitive control knobs positioned at the front for easy access. This model also includes a flame failure safety device, which automatically cuts off the gas supply if the flame goes out, providing peace of mind while cooking.

On the other hand, the HCG500 presents a more compact option without sacrificing performance. This model includes a 4-burner gas hob, making it an ideal choice for smaller kitchens or those looking to save space. The HCG500 maintains a modern design with stainless steel finishes and easy-to-clean surfaces, catering to both functionality and style. The burners in this model are designed for efficiency, providing rapid heating and simmer functions to accommodate various cooking needs.

Both the HCG520 and HCG500 utilize advanced technology to ensure optimal performance. The precise gas controls enable an excellent range of heat settings, which allows chefs to experiment with cooking techniques, from high-heat searing to gentle simmering. Additionally, the appliances feature a removable cast iron pan support, offering a sturdy base for your cookware while also making cleaning straightforward.

These models are designed to cater to the environmentally conscious consumer. The use of gas hobs in combination with energy-efficient burners aligns with sustainable cooking practices, reducing overall energy consumption.

In terms of characteristics, both appliances come with easy-to-follow installation guides, ensuring a smooth setup process. Customer reviews highlight the ease of use and reliability, with many praising their efficiency in daily cooking tasks.

Whether you opt for the HCG520 with its extensive features or the space-saving HCG500, both models deliver exceptional performance, enhanced safety, and stylish design that will complement any modern kitchen.