CDA SC309 manual Replacement of the Grill Burner Injector

b) REPLACEMENT OF THE GRILL BURNER INJECTOR

✓Remove the burner by unscrewing the front screw (fig. 8).

Gently suspend the burner as shown in figure 9.

Be careful not to damage the wire of the electric ignition and the probe of the safety valve.

✓Using a 7 mm box spanner, replace the injector (indicated by the arrow in fig. 9).

✓Replace the burner repeating the above steps in reverse order.

Figure 8

Figure 9

TABLE FOR THE INJECTORS

GB							Cat: II 2H3+
	Nominal	Reduced	G 30 - 28-30 mbar				G 20
BURNERS				G 31 - 37 mbar			20 mbar
	Power	Power
			By-pass	Ø injector	Ring opening	By-pass	Ø injector	Ring opening
	[kW]	[kW]
			[1/100 mm]	[1/100 mm]	[mm]	[1/100 mm]	[1/100 mm]	[mm]
OVEN	3,000	0,650	42	83	15 *	adjustable	125	4 *
GRILL	2,300	-	-	76	fully open*	-	115	4 *

*= Reference value

11